Wheels & Tires Grabbing the road and stopping.

19" Wheel/suspension setup 07 sedan

Old Jan 11, 2012 | 10:31 PM
  #1  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
19" Wheel/suspension setup 07 sedan

Looking to go with a semi-conservative setup for the summer and wondering if the direction I'm headed sounds ok. I have a 2007 G35S sedan and was thinking I could get away with 19's and a light drop for the summer. How does this sound?

Front: 245/40-19 19x8.5 +35
Rear: 275/35-19 19x9.5 +38

Eibach springs (or suggestions for a minimal drop)

Does the setup above seem ok? Do I need to get shocks and spacers? I'm hoping the wider tires would help with the spacer issue, but didn't know if that could be avoided.

Thanks all
 
Reply
Old Jan 12, 2012 | 11:23 PM
  #2  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
bump
 
Reply
Old Jan 17, 2012 | 10:30 PM
  #3  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
please?
 
Reply
Old Jan 17, 2012 | 11:58 PM
  #4  
J2S2M's Avatar
Registered User
iTrader: (32)
Joined: Mar 2008
Posts: 2,891
Likes: 61
From: Irvine, CA
Those offsets will work fine for stock height but if you plan to drop your car, you will need spacers especially up front.
 
Reply
Old Jan 18, 2012 | 12:04 AM
  #5  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
Originally Posted by J2S2M
Those offsets will work fine for stock height but if you plan to drop your car, you will need spacers especially up front.
cool, thanks! How big of spacers would I need and would the wider tires up front help with the need for spacers? They would be 20mm wider then the stock tires...
 
Reply
Old Jan 18, 2012 | 12:38 AM
  #6  
J2S2M's Avatar
Registered User
iTrader: (32)
Joined: Mar 2008
Posts: 2,891
Likes: 61
From: Irvine, CA
With those offsets, 10mm spacer front and back will make your wheels fit pretty flush on a conservative drop.
 
Reply
Old Jan 18, 2012 | 12:36 PM
  #7  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
Thanks for all your help man, very much appreciated!

last set of questions: with all the installs I've done on cars for various things, I've never done spacers. Are they pretty easy? Also where is the best place to get the 10mm spacers? no rubbing issues?
 
Reply
Old Jan 18, 2012 | 02:21 PM
  #8  
J2S2M's Avatar
Registered User
iTrader: (32)
Joined: Mar 2008
Posts: 2,891
Likes: 61
From: Irvine, CA
You won't have any rubbing issues with those 10mm spacers with an Eibach drop. Make sure to purchase spacers that are hubcentric and that come with built-in studs. I highly recommend the H&R DRM spacers or the Project Kics spacers. Do not go with cheap ones like Ichiba and other generic poor quality ones. There are many vendors on the forum that offer these spacers.

Also here's a quick DIY for the installation. It's pretty easy. Just make sure you torque them down to spec.

 
Reply
Old Jan 19, 2012 | 01:36 PM
  #9  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
Originally Posted by J2S2M
You won't have any rubbing issues with those 10mm spacers with an Eibach drop. Make sure to purchase spacers that are hubcentric and that come with built-in studs. I highly recommend the H&R DRM spacers or the Project Kics spacers. Do not go with cheap ones like Ichiba and other generic poor quality ones. There are many vendors on the forum that offer these spacers.

Also here's a quick DIY for the installation. It's pretty easy. Just make sure you torque them down to spec.

HOW TO INSTALL WHEEL SPACERS
Yeah that looks about as easy to do as I would expect, awesome!

I didn't see a 10mm option with H&R, but they did have a 15mm option see here:

15MM SPACERS HERE

15mm should still be good right? or could I go wider?

Thanks again man, very helpful!
 

Last edited by jdm7; Jan 19, 2012 at 03:53 PM.
Reply
Old Jan 19, 2012 | 11:24 PM
  #10  
J2S2M's Avatar
Registered User
iTrader: (32)
Joined: Mar 2008
Posts: 2,891
Likes: 61
From: Irvine, CA
It really depends how flush you want your set up to be. I personally would go with just a 10mm spacers with those tire sizing with your mild Eibach drop. If you go lower, then I'd consider 15mm spacers but I'd also go with smaller tires.

Just my .02
 
Reply
Old Jan 23, 2012 | 11:33 PM
  #11  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
ok, so I think I'm going to go with these wheel/tire combo if it looks good:

Avant Garde M368
19x8.5 ET35
19x9.5 ET40

5x114.3 with 73.1mm centerbore
They will include the hub centric rings for the rims
10-15mm spacers (can I run both the rings and spacers?)
245/40/19 and 275/35/19 for tires
Eibach drop
 
Reply
Old Jan 24, 2012 | 03:10 PM
  #12  
neal@tirerack's Avatar
PLATINUM SPONSOR
iTrader: (4)
Joined: Apr 2009
Posts: 1,062
Likes: 31
Sizes look ok but if you use a 48mm or lower offset wheel in the rear you may have a slight fender fender rub.
 
Reply
Old Jan 24, 2012 | 06:34 PM
  #13  
jdm7's Avatar
Thread Starter
|
Registered User
Joined: Jun 2011
Posts: 111
Likes: 5
Originally Posted by neal@tirerack
Sizes look ok but if you use a 48mm or lower offset wheel in the rear you may have a slight fender fender rub.
Even on a Mild drop? I thought I would be safe

And the spacers are ok to run with the hubcentric rings?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
privatecorye
Steering & Suspension
1
May 31, 2016 01:56 AM
RA102223
Engine, Drivetrain & Forced-Induction
1
Aug 15, 2015 09:24 PM
Cam_Cooper3
Intake & Exhaust
8
Aug 10, 2015 07:04 PM
.cakestar
Audio/Video/Electronics
2
Jul 17, 2015 08:22 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:17 AM.