finnaly saved up enough money to buy rims for my g and was wonderin if these specs would give me a mild aggresive fitment and if they would clear my stock brembos:
rims-work vs-xx
front-19x9.5 +2 (245/35)
rear-19x10.5 +7 (275/35)
also if i would need spacers to make it flush with the fenders, and what faces would i need(a,o,t,etc)
any input would help, i dont know to much about wheels hahaha

 

work vs-xx?

 

yea my bad fixed it

 

I'm fairly certain that Work's O-disk face will not work with the stock Brembos. I believe their A-disk is the standard one, and R-disk is for big brakes. Judging by the sizing though, you have R-disk front wheels and A-disk rear wheels, which sounds about right.

The wheel sizing is definitely aggressive though!

 

Yes, those will definitely clear the stock Brembos.

 

So are the Brembos considered Big brakes or just regular? Meaning if I buy new rims and I have Brembos and they ask if I have big brakes. Do I say yes or no.

 

Say yes.

 

sweet thanks for the feedback.and about spacers are they needed for a flush fitment with the fenders?

 

With those specs I don't think you will need spacers

 

You're not going to need spacers but you're going to either need a mild fender pull, little bit of camber or a slight stretch of the tires.

If you have more questions, ask in the stickied thread at the top of this section.