Hey all, just have a question about a set of rims i am considering purchasing. As of now i am running a 225/40/19 tire in front and 245/40/19 in the rear on stock rays with 25mm spacers all around. No rubbing with no fender roll.

Now..... i want to purchase a set of wheels that are 8.5 front + 15 and 9.5 rear +15......will this have a flush look without rubbing....and will my stock tire sizes work with these rims. Also i might want to throw in im dropped on tein 350 h techs.

Thanks ahead of time for some advice.

 

First of all, your tire sizes are not correct for OEM fitment. The front should be a 225/45.

The wheels will fit, they will be flusher than OEM wheels but not perfect.

I'd recommend wider tires for these wheels, the 225 or the 245 can go on the front of the car though.

 

Thanks ... i mean im not looking for the rim to poke. Not really into that look. The car isnt super slammed being that the pot holes of nyc arent very loving to dropped cars but im just looking for pretty much what offset is best to achieve the look my car has now with stock rays with the 25mm spacers. Sorry for the confusion. Guess that should have been my original question.

Also i am not dead set on the wheels. I am open to suggestions and would welcome different set up and size recommendations. Thanks

 

Do you want to roll the fenders?

 

I would prefer not to bc the car was scraped on the quarter panel and some minor body work was done on the rear fender. I would be worried about possible cracking of body filler and would prefer options without having to roll the fender. Thanks