Wheels & Tires Grabbing the road and stopping.

Vossen wheels suck!

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #31  
Old 08-08-2013 | 05:39 PM
driftsucky's Avatar
Registered User
Joined: Dec 2008
Posts: 1,985
Likes: 156
From: Rochester NY
I know plenty of people with Vossen and don't have any issues. I wouldn't say they're a crappy product based on that. That said, years ago, before I had my import, I had a HORRIBLE experience with them. Since then, I have chosen not to deal with them. But, in this case, it really sounds like your car. Good luck either way Gunny. HOO-RAH!
 
  #32  
Old 08-11-2013 | 11:11 AM
Diego@vossen's Avatar
Registered User
Joined: Aug 2013
Posts: 15
Likes: 2
Originally Posted by ivey_usmc
I have a 05 coupe and ordered new vossen VVSCV3 and hankook v12's. I had shaking from the get go that they couldnt ballance out then two weeks later the paint was bubbling and chipping off the wheels. A sceond set was sent out and there where scratches on all the wheels and bubbles in the paint out of the box. Vossen said I they wont be sending out anymore wheels. I really wanted the wheels so I kept the second set. (my mistake) After I had them mounted I had such a bad shake everything in my car vibrates! I went back to have them re balance the wheels 5 times and still it shakes. I will be sending them off to a wheel repair shop in two weeks to see if they can be salvaged. I started doing some research (which I should of done before) and there are alot of complaints with the finish chipping off and vibration problems. Luxury, performance wheel ...I think not. Dont waste your money!
Very sorry to hear about the issues you have experienced. Which Vossen dealer you have been dealing with? I do apologize and would like the opportunity to diffuse the situation and get to the bottom of this. Please feel free to contact me direct at diego@vossenwheels.com with pictures of the defective areas as well as information on when and where you purchased. As for the vibrations, it could be several things! Please have a road force test done using a hunter 9600/9700 machine to figure out the issue. It could be a defective tire, improper balance or maybe hub rings were not installed. It is very rare to come across workmanship issues but if you are experiencing clearcoat issues then that will certainly fall under our warranty guidelines and we can replace free of charge. Please contact me and we will go from there. Again, very sorry for what you have been dealing with.
 
The following 2 users liked this post by Diego@vossen:
JKL1031 (08-13-2013), TIAN (08-12-2013)
  #33  
Old 08-11-2013 | 11:52 AM
PAIXAO's Avatar
Registered User
iTrader: (14)
Joined: Sep 2008
Posts: 8,338
Likes: 444
From: The Commonwealth
I had no idea Vossen Wheels could be had for around 2k brand new. Never researched them as I'm not a fan of the way they look.

I'm happy with my BBS
 
The following users liked this post:
spinna001 (08-15-2013)
  #34  
Old 08-13-2013 | 05:34 AM
Jordan_Inc's Avatar
Registered User
Joined: May 2009
Posts: 30
Likes: 3
Originally Posted by ivey_usmc
lol I paid 3K I should get more than crap
You paid $3k for Vossens?!

Could have bought my HREs, haha.
 
The following users liked this post:
Invalid_User (08-13-2013)
  #35  
Old 08-15-2013 | 09:06 AM
spinna001's Avatar
Registered User
iTrader: (4)
Joined: Jan 2009
Posts: 1,250
Likes: 21
From: Lake Worth florida
Originally Posted by faiz23
Duhhh....you get what your pay for and as always....stock ftw
or Works..... lol
 
  #36  
Old 08-17-2013 | 01:05 PM
ivey_usmc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2013
Posts: 69
Likes: 6
Originally Posted by Deezflip
what kind of tires are you running? it could be the tires where cheap tires can bubble, belt shift, warp, etc.
Hankook v12's
 
  #37  
Old 08-17-2013 | 07:19 PM
Camal_WOLF's Avatar
Registered User
Joined: Aug 2013
Posts: 25
Likes: 1
Im so glad I decided to look this up before I bought some. I had no idea this was a common issue, or an issue at all for that matter. Hope you get them fixed. They still look good
 
  #38  
Old 08-17-2013 | 07:26 PM
TIAN's Avatar
Hold The Line
iTrader: (20)
Joined: Oct 2006
Posts: 17,779
Likes: 622
From: SFL
Premier Member
Any news on what's is going on? Have you gotten in contact with Diego at vossen? How many sets of wheels do you have? What happened to the other set? Did you have a road force test done? Maybe find a buddy that can swap wheels and see if he can replicate your issue?

Fill us in please
 
  #39  
Old 08-17-2013 | 07:33 PM
WhosUrBuddiee's Avatar
Registered User
iTrader: (4)
Joined: Oct 2005
Posts: 14,494
Likes: 995
From: Neverland
Originally Posted by Camal_WOLF
Im so glad I decided to look this up before I bought some. I had no idea this was a common issue, or an issue at all for that matter. Hope you get them fixed. They still look good
Far from common. First time I have ever heard of it and OP is not providing quite a bit of information.
 
  #40  
Old 08-18-2013 | 12:40 PM
AzuMaster's Avatar
Registered User
Joined: Oct 2009
Posts: 1,176
Likes: 130
From: Waldorf, Maryland
Yea, I'm not a fan of Vossen wheels as far as design but I've never heard of any issues like this. It's definitely not a common thing. If a company makes a large amount of the same product there are bound to be issues in some of them. Work, Volk, Rays down to Varrstoens, XXRs and other brands will all have problems with a small percentage. The OP just happens to be one of the unlucky few that's gotten what seems to be a bad wheel. But even with everything he's said I believe like WhosYourBuddie has stated that the underlying issue is something mechanical and not the wheels themselves. Just my .02
 
  #41  
Old 08-18-2013 | 12:43 PM
ivey_usmc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2013
Posts: 69
Likes: 6
I have my stocks back on for now and it's back to smooth road's. I have finals then in 2 weeks from now ill take them to get the road force test done. If still a issue ill contact Deigo @ vossen. Just sucks going through so many problems for the past few months over wheels. Ive had ssr comp's down to cheap tenzo and rota's when I first started driving and never this much grief.
 
  #42  
Old 08-18-2013 | 01:34 PM
TIAN's Avatar
Hold The Line
iTrader: (20)
Joined: Oct 2006
Posts: 17,779
Likes: 622
From: SFL
Premier Member
Still, no answers to a lot of what we've been asking. Unsubscribing
 
  #43  
Old 08-18-2013 | 02:27 PM
ivey_usmc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2013
Posts: 69
Likes: 6
Originally Posted by TIAN
Any news on what's is going on? Have you gotten in contact with Diego at vossen? How many sets of wheels do you have? What happened to the other set? Did you have a road force test done? Maybe find a buddy that can swap wheels and see if he can replicate your issue?

Fill us in please
like I said in the origional post the first set was messed up then I had another set sent and the second set was messed up as well, discount tire was working with them, First set was sent back, road test in two weeks
 
  #44  
Old 08-18-2013 | 05:53 PM
TORETTO's Avatar
Registered User
iTrader: (18)
Joined: Sep 2007
Posts: 10,359
Likes: 1,939
From: Auckland, New Zealand
don't think it's been mentioned in this thread, but did you change anything else on the car?

Did you get an alignment?
 
  #45  
Old 08-18-2013 | 06:37 PM
ivey_usmc's Avatar
Thread Starter
|
Registered User
Joined: Mar 2013
Posts: 69
Likes: 6
Originally Posted by TORETTO
don't think it's been mentioned in this thread, but did you change anything else on the car?

Did you get an alignment?
I got a allignment the day I had the first set of wheels installed. The car has a full oem suspension.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mkhlmnn
V36 Interior, Exterior & Lighting
2
02-16-2016 10:27 PM
IEMaestro
20 Inch
0
07-30-2015 05:30 PM
Karnicle
G35 Sedan V35 2003-06
1
07-23-2015 06:08 AM
Soumilg
G35 Coupe V35 2003 - 07
4
07-18-2015 01:33 PM
RAVSPEC
Wheels & Tires-Vendor
0
07-16-2015 02:58 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 10:24 PM.