When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I 3D printed some test fit wheel spacers when I was trying to figure out what size wheel spacer looked best on my car. Personally, I prefer to actually see the wheels with different spacers instead of just measuring the gap and hoping that the measured size of spacer will look right. These are super useful so you don't have to buy and return spacers to get the right fitment. These would also be useful for testing different offsets (on your current setup) for ordering a new set of wheels.
I'm wondering if anyone else would be interested in these. I can sell a bundle with a 10mm, 5mm, and some 1mms for a pretty low price. I can also make custom thicknesses or different bolt patterns if anyone wants. Let me know!
** Obviously these are for testing only and should not be driven on. With these on, I only tightened down the lug nuts just enough to secure the wheel to the hub, lowered the car down, analyzed fitment, then raised back up and removed off the car. I feel like I have to say this even though it should be obvious.... **
12-02-2020 | 05:20 PM
