350z Tein H Techs installed. Pics and info inside<<
350z Tein H Techs installed. Pics and info inside<<
ok just overview
2003 6mt coupe
225 45 18 front tires rear tires 245 45 18
after looking at all the springs the 350z Tein H Techs were the best in my opinion. I wanted a spring that handled better and rode good and I can honelstly say the ride quality is great and car handles better.
So now for the total drop. on the 350z it says .3 in front and .2 in rear but on the g35 its more.
BEFORE I LOWERED THE CAR FROM GROUND TO FENDERLIP IT MEASURED THE FOLLOWING
FRONT LEFT AND RIGHT 27 1/8 INCHES
REAR LEFT AND RIGHT 27 3/4 INCHES
AFTER DROP FROM GROUND TO FENDERLIP
FRONT LEFT AND RIGHT 25 15/16
REAR LEFT AND RIGHT 26 7/8
So the springs gave me a final drop of about 1 1/4 in front and rear about 7/8 inches.
NOW IN REAR YOU CAN LOWER IT WITH NO CUTTING OF THE SPRINGS HERES HOW. For me the rear needs to come like 3/8-1/2 inch more down which is no problem. In back when you remove the springs you will noitce the rubber bumpstop. Now on top just cut a straight line off the bumpstop on how much lower you want the car. 1/2 inch off the top of the rubber bumpstop will lower 1/2 inch when car is dropped
Anymore questions just ask away
here are the pics
2003 6mt coupe
225 45 18 front tires rear tires 245 45 18
after looking at all the springs the 350z Tein H Techs were the best in my opinion. I wanted a spring that handled better and rode good and I can honelstly say the ride quality is great and car handles better.
So now for the total drop. on the 350z it says .3 in front and .2 in rear but on the g35 its more.
BEFORE I LOWERED THE CAR FROM GROUND TO FENDERLIP IT MEASURED THE FOLLOWING
FRONT LEFT AND RIGHT 27 1/8 INCHES
REAR LEFT AND RIGHT 27 3/4 INCHES
AFTER DROP FROM GROUND TO FENDERLIP
FRONT LEFT AND RIGHT 25 15/16
REAR LEFT AND RIGHT 26 7/8
So the springs gave me a final drop of about 1 1/4 in front and rear about 7/8 inches.
NOW IN REAR YOU CAN LOWER IT WITH NO CUTTING OF THE SPRINGS HERES HOW. For me the rear needs to come like 3/8-1/2 inch more down which is no problem. In back when you remove the springs you will noitce the rubber bumpstop. Now on top just cut a straight line off the bumpstop on how much lower you want the car. 1/2 inch off the top of the rubber bumpstop will lower 1/2 inch when car is dropped
Anymore questions just ask away
here are the pics
Last edited by NORCALSTI; Mar 24, 2005 at 04:50 PM.
hey norcalsti, in that pic, did you cut the rubber mount in the rear or is that just after you installed the springs. I was gonna cut mines but not sure if it'll even out the rear or go lower than the front. I noticed with a full tank of gas, the car is almost an even drop.
in person you can totally see. the rear drop is WITHOUT cut bumpstops. ill prob cut them next week
Trending Topics
Before and after pic of my G dropped on Tein 350Z H-Tech springs.
Before
After
Thats the closest I have for compare at the moment, but ill look over what pics I have of my G with stock springs and take pics of the car now in the same positions.
Before
After
Thats the closest I have for compare at the moment, but ill look over what pics I have of my G with stock springs and take pics of the car now in the same positions.
Originally Posted by anbakookie
anybody got h-tech with 19's?? I want to see how bad the gap is before i get these springs!! Do you guys think itll be bad or good?
these...
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
May 31, 2020 01:56 PM
zcherub
G35 Coupe V35 2003 - 07
5
Aug 27, 2015 09:47 AM
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM




