19's with +20-30 offsets.
#1
19's with +20-30 offsets.
Hey guys, just wondering if you guys have any rubbing issues inside the fender wells, like against anything besides the springs and the actual fender. I like the lip look (nothing stupid crazy) but something about the width of a dollar bill (rear, and smaller in front obviously). What offset am i looking to get? Id like to have a 10 inch wide rim in the back and a 9 up front.
Sorry for the noob like question, im more accustomed to power than wheels lol.
Thanks guys!!
Sorry for the noob like question, im more accustomed to power than wheels lol.
Thanks guys!!
#2
#5
oldvfrguy, do you have a pic of your setup? i want to see what that kinda offset looks like on your car... im getting 20's gt-c's in +20 F and +22 R and was offered a +31 F and +24 R by the place im ordering it from, but i heard those wont give me much of a lip... can you plz post some pics up? thanks
#6
#7
Trending Topics
#8
Originally Posted by Peanuts
gt-v's is what i meant. the rims in your pic (correct me if im wrong). im thinkin +31f and +22r can i see a pic of your whole car..like a side shot.
Did you actually read any of the above posts????? lol
A- the correct Volk sizes are 30f & 24r
B - mine won't be installed on the car for a couple of weeks.
#9
#11
#12
#13
#14
1. A +20 will only clear brembos if it is a high pad wheel. Volk has high pad, mid pad, and low pad, and all could be +20, but only their high pad wheel will fit with brembo!
2. If you want a real lip, you should look at the Racing Hart R7...5" in the back. A place called www.revhighonline.com has them over on My350z.com, and it shows him measuring the lip, and before the curve down, it reads 5". That is nasty.
3. The best part is that revhigh is selling these wheels for cost right now on his End of Summer Clearance...literally for cost, I bought a set of 20" GTC's for super cheap!! Give them a call.
4. The correct offset is not +30 and +24. The correct offset is whatever you can stuff under there without it rubbing, and I know for a fact, that what you can stuff under there is a lower offset than +30 and +24. The +30 he is talking about is a high pad wheel, while the +24 is a low pad wheel.
2. If you want a real lip, you should look at the Racing Hart R7...5" in the back. A place called www.revhighonline.com has them over on My350z.com, and it shows him measuring the lip, and before the curve down, it reads 5". That is nasty.
3. The best part is that revhigh is selling these wheels for cost right now on his End of Summer Clearance...literally for cost, I bought a set of 20" GTC's for super cheap!! Give them a call.
4. The correct offset is not +30 and +24. The correct offset is whatever you can stuff under there without it rubbing, and I know for a fact, that what you can stuff under there is a lower offset than +30 and +24. The +30 he is talking about is a high pad wheel, while the +24 is a low pad wheel.
Last edited by JOES14; 10-13-2005 at 03:19 PM.
#15
Originally Posted by JOES14
1. A +20 will only clear brembos if it is a high pad wheel. Volk has high pad, mid pad, and low pad, and all could be +20, but only their high pad wheel will fit with brembo!
2. If you want a real lip, you should look at the Racing Hart R7...5" in the back. A place called www.revhighonline.com has them over on My350z.com, and it shows him measuring the lip, and before the curve down, it reads 5". That is nasty.
3. The best part is that revhigh is selling these wheels for cost right now on his End of Summer Clearance...literally for cost, I bought a set of 20" GTC's for super cheap!! Give them a call.
4. The correct offset is not +30 and +24. The correct offset is whatever you can stuff under there without it rubbing, and I know for a fact, that what you can stuff under there is a lower offset than +30 and +24. The +30 he is talking about is a high pad wheel, while the +24 is a low pad wheel.
2. If you want a real lip, you should look at the Racing Hart R7...5" in the back. A place called www.revhighonline.com has them over on My350z.com, and it shows him measuring the lip, and before the curve down, it reads 5". That is nasty.
3. The best part is that revhigh is selling these wheels for cost right now on his End of Summer Clearance...literally for cost, I bought a set of 20" GTC's for super cheap!! Give them a call.
4. The correct offset is not +30 and +24. The correct offset is whatever you can stuff under there without it rubbing, and I know for a fact, that what you can stuff under there is a lower offset than +30 and +24. The +30 he is talking about is a high pad wheel, while the +24 is a low pad wheel.
R7 is not a true 5" lip mang. the spokes end on the lip. just like the Volk GT-V's. offsets vary A LOT depending on the design of the wheel too.