Is the stock lug wrench even the correct size for the stock lugs? I removed one to install wheel locks and the lug got impacted to the wrench! I never had this happen before.

 

yes the stock lug wrench is the correct size for the stock lugs.. but they aren't the easiest things to use.. i use the wrench that comes with my jack and it's 10 times easier to use..

 

I don't understand how it could get impacted it if was the correct size.

 

smack it off the ground a few times it'll pop out.If not you can always heat it. But yes it's the correct size.

 

Turn it back on to the stud but don't tighten it. Then rock the wrench back and forth a bit. Finally, remove nut. At this time you can even use the lug wrench to remove it and it won't stick because there shouldn't be any pressure.

I don't have any idea about the size issue though.

Curt