How wide can u go w/ front/rear wheels?
Thread Starter
|
Registered User
Joined: Sep 2003
Posts: 54
Likes: 0
From: Los Angeles, Ca
How wide can u go w/ front/rear wheels?
How wide of a rim can you bolt right on w/ and w/o rolling the fenders? I want to go 10" in the rear and 9.5" in the front. I'm after Fat Lip! Deep dish!
-------------------
Looking for a DG on Graphite 6MT, Nav and Premium only in Los Angeles area.
-------------------
Looking for a DG on Graphite 6MT, Nav and Premium only in Los Angeles area.
Registered User
Joined: Feb 2003
Posts: 858
Likes: 1
From: Sunny San Diego
Re: How wide can u go w/ front/rear wheels?
I seen a 350Z with 10.5 in the rears without rolling their fenders. It all depends on offsets. The lower the offset, the bigger the lip will be and the more likely you will need to roll your fenders.
I will be running 19x10.5 +17 offset on the rear. This will fit the G35c, but you will need to roll your fenders. The lip will be 4" on my rims this Sept.
- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-
I will be running 19x10.5 +17 offset on the rear. This will fit the G35c, but you will need to roll your fenders. The lip will be 4" on my rims this Sept.
- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-
Registered User
Joined: Jan 2003
Posts: 1,757
Likes: 0
From: Cleveland, Ohio
Re: How wide can u go w/ front/rear wheels?
o wow damn that is going to be a crazy set up raysur350gt. what size tire u running back there. u are going to have some major traction with 10.5
Re: How wide can u go w/ front/rear wheels?
i have 19 x 9.5 all around with +35 offset in front and +22 offset in back, kinda close to the front suspension but no rubbing problems, full turn radius also
2003.5 G35 Silver/Graphite 6MT Premium Coupe
2003.5 G35 Silver/Graphite 6MT Premium Coupe
Thread Starter
|
Registered User
Joined: Sep 2003
Posts: 54
Likes: 0
From: Los Angeles, Ca
Re: How wide can u go w/ front/rear wheels?
Can someone explain what the Offset # means? I've never been clear on this?
Raysur, Even with rolled fenders, do you think there will be rubbing when you roll over dips? What kind of rims are you getting?
-------------------
Looking for a DG on Graphite 6MT, Nav and Premium only in Los Angeles area.
Raysur, Even with rolled fenders, do you think there will be rubbing when you roll over dips? What kind of rims are you getting?
-------------------
Looking for a DG on Graphite 6MT, Nav and Premium only in Los Angeles area.
Registered User
Joined: Feb 2003
Posts: 858
Likes: 1
From: Sunny San Diego
Re: How wide can u go w/ front/rear wheels?
G35Hunter,
Check out www.discounttire.com and read the FAQ and tools page. It will pretty much give you a good grasp on what offset mean on a rim. Usually when someone ask, I will go into a long discussion about them and it never ends...
Ok, now about dips and speedbumps with rolled fenders. I had my fenders rolled on my last car (300ZXTT) because I was running 18x10s (really agressive offset also) on the rear with 285/30/18 tires. I didn't have any trouble with them hitting or rubbing.
The rims I'm getting are gunmetal Gram Light 57F-Pros. Here is a pic of them on a FD3S:
They are already on a container in Japan waiting for the boat to ship out, which should be this week. After they reach port they get shipped to my place.
- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-
Check out www.discounttire.com and read the FAQ and tools page. It will pretty much give you a good grasp on what offset mean on a rim. Usually when someone ask, I will go into a long discussion about them and it never ends...
Ok, now about dips and speedbumps with rolled fenders. I had my fenders rolled on my last car (300ZXTT) because I was running 18x10s (really agressive offset also) on the rear with 285/30/18 tires. I didn't have any trouble with them hitting or rubbing.
The rims I'm getting are gunmetal Gram Light 57F-Pros. Here is a pic of them on a FD3S:
They are already on a container in Japan waiting for the boat to ship out, which should be this week. After they reach port they get shipped to my place.
- Don't argue with idiots. They will bring you down to their level and beat you with experience.=P-
Thread
Thread Starter
Forum
Replies
Last Post
FS[Canada]: G-Line 18" Black w/Chrome Lip with Tires + TPMS
bananax
Wheels & Tires CDN
0
Sep 10, 2015 06:14 PM
scc
G35 Sedan V35 2003-06
19
Apr 18, 2005 07:57 AM
