FS[SoCal]: SSR SP3 SBC 19x11.5 square +12F HP, +18R SL
SSR SP3 SBC 19x11.5 square +12F HP, +18R SL
Hi All,
Sad to see these go, but I gotta let them go. What you see here is what you'll get:
- 2 of 19x11.5 +12 HP (High Pad) - Should clear BBK. Confirm with your manufacturer. One has a small stain on the spokes (ate through the powdercoat). Valvestems installed. Various nicks and scratches from the condition of used wheels.
- 2 of 19x11.5 +18 SL (Super Low) - Maximize lip with SSR's terrible offsets. I ran 7mm spacers in the rear to match front track. One has a small curbage. Other wheel has a shave? curbage... not sure how to explain it, you'll see it in the pics. Valvestems installed. Various nicks and scratches from the condition of used wheels.
- 4 of Carbon Fiber B-Type Low caps
Edit 04/22/11 -
New Pics:
Front Wheel 1 Barrel
Front Wheel 1 Face
Front Wheel 2 Barrel
Front Wheel 2 Face - Can you spot the stain on the spokes?
Front Wheel 2 Face - Spoke Stain
Rear Wheel 1 Barrel
Rear Wheel 1 Face
Rear Wheel 1 Curbage
Rear Wheel 2 Barrel
Rear Wheel 2 Face
Rear Wheel 2 Curbage
I am also in the Socal Orange County region. Local pickups ARE PREFERRED.
Asking $2600 due to the condition and unorthodox offsets. Cash is PREFERRED, however if you have a square setup of 18"s that may tickle my fancy, a trade + cash may be warranted. I'm looking for Enkeis, Weds, Volks, Advans, etc.
Thanks.
Sad to see these go, but I gotta let them go. What you see here is what you'll get:
- 2 of 19x11.5 +12 HP (High Pad) - Should clear BBK. Confirm with your manufacturer. One has a small stain on the spokes (ate through the powdercoat). Valvestems installed. Various nicks and scratches from the condition of used wheels.
- 2 of 19x11.5 +18 SL (Super Low) - Maximize lip with SSR's terrible offsets. I ran 7mm spacers in the rear to match front track. One has a small curbage. Other wheel has a shave? curbage... not sure how to explain it, you'll see it in the pics. Valvestems installed. Various nicks and scratches from the condition of used wheels.
- 4 of Carbon Fiber B-Type Low caps
Edit 04/22/11 -
New Pics:
Front Wheel 1 Barrel
Front Wheel 1 Face
Front Wheel 2 Barrel
Front Wheel 2 Face - Can you spot the stain on the spokes?
Front Wheel 2 Face - Spoke Stain
Rear Wheel 1 Barrel
Rear Wheel 1 Face
Rear Wheel 1 Curbage
Rear Wheel 2 Barrel
Rear Wheel 2 Face
Rear Wheel 2 Curbage
I am also in the Socal Orange County region. Local pickups ARE PREFERRED.
Asking $2600 due to the condition and unorthodox offsets. Cash is PREFERRED, however if you have a square setup of 18"s that may tickle my fancy, a trade + cash may be warranted. I'm looking for Enkeis, Weds, Volks, Advans, etc.
Thanks.
Last edited by panda007; Apr 24, 2011 at 01:44 PM. Reason: New Price
Not on the g (long gone), but on the x.
The more I look at this pic, the more I don't want to sell these wheels...
The more I look at this pic, the more I don't want to sell these wheels...
Trending Topics
Apparently, a lot of folks like the rear pairs more. This will probably be my final bump for the thread.
Front wheels lip = 4"
Rear wheels lip = 5"
The rears and the fronts will be priced the same at 1300 shipped a pair (1250 local). Fronts have no lip curb rash at all while the rears do, yet the rears have an extra inch of lip, etc etc. Beauty is in the eye of the beholder... choose your pair wisely. :thumbup:
Front wheels lip = 4"
Rear wheels lip = 5"
The rears and the fronts will be priced the same at 1300 shipped a pair (1250 local). Fronts have no lip curb rash at all while the rears do, yet the rears have an extra inch of lip, etc etc. Beauty is in the eye of the beholder... choose your pair wisely. :thumbup:
Thread
Thread Starter
Forum
Replies
Last Post
