FS:ATI procharger with cutom intercoolersetup
#1
FS:ATI procharger with cutom intercoolersetup
First off the kit is still on the car it is used and has about 6300 miles on it. Car is just sitting now in garage. Works fine, Comes with everything that the kit form the factory comes with except i upgraded the intercooler to a side to side/specs. 21"core"x14x4 3" inlet outlets all custome piping and aluminum welding. It is a race spec intercooler, the biggest that i could fit without cutting the impact bar or chasis. The piping is the routed for least pressure drop. I will have pix of the kit when i have time to take it off. Of course that is going to be based upon interest of the kit. asking price is 3450+ shipping,which is dirt cheap compared to what i have stuck into the intercooler system.
Note: i know someone will ask so...im selling to go bigger such as cutom single turbo built motor etc.
Note: i know someone will ask so...im selling to go bigger such as cutom single turbo built motor etc.
#4
did u also change the bypass valve? Also, is there any problem with the stock idle if I don't bump the idle?
What else does the kit include? Does it have a fuel pump and injectors and does it include all the bolts and new belt?
What else does the kit include? Does it have a fuel pump and injectors and does it include all the bolts and new belt?
#5
it comes with everything you need to get the car boosted. That Ati kit does not come with injectors the fmu will help you compensate for that. If you want more then 7 or 8 psi however you will need to upgrade injectors. Yes the kit does come with a fuel pump. No you do not need to up the idle. Idle is only an issue if you have a vaccum leak.
#7
you can get more boost by changing pulleys to create more boost. I did not change my bypass. I was going to get a greddy type S. The superchager is still on the car so i cannot take quality pix until i take it the kit off. PM me with more questions my box should be open now.
Thread
Thread Starter
Forum
Replies
Last Post