FS: Polished Vortech Supercharger - Full Kit
#1
Join Date: Jan 2005
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
FS: Polished Vortech Supercharger - Full Kit
I never thought I was going to do this, but I am thinking of selling my super reliable Vortech Polished kit. I am thinking of going with TT, so obviously the Vortech has to go.
This kit has been rock solid since day one. I've never had any mechanical problems with it at all. It comes with extra belts, all new idler pulleys, all new jackshaft bearings. The unit was inspected by Vortech and everything was great. This is a full kit that comes with Split Second Engine Management, Vortech Aux. Fuel Pump, Vortech FMU, Spearco Intercooler, hoses, clamps, fuel/oil lines, blower, bracket, etc. Simply plug and play kit. I've ran the stock 3.33 pulley since day 1, so the blower was never abused. Even the intercooler is in like new condition, since it was covered by the stock bumper the whole time. If you want to see the real potential of this kit, I suggest going with bigger pullies for more boost. It has less than 10k miles on the kit. Condition is good for everything that it comes with. Blower has normal wear scratches on the metal that polished metal gets. It's almost impossible to keep polished metal scratch free. The are some deeper scratches on the underside of the blower from installation, but they are not visible once in the engine bay. Unit will be taken off within the month, sooner if I get a deposit from someone.
JWT Oil Pan spacer pre-tapped for oil return also included.
I also have an extra custom machined 2.87 pulley that I was going to use. I can throw it in for a little more $$$. This is not the Reichard Racing pulley that eats belts. It's a custom CNC machined pulley and has been proven to have no slip and little wear on belts.
Price: $3500. Located is Socal for local pickup.
![](http://i114.photobucket.com/albums/n273/idk216i/DSC03985.jpg)
This kit has been rock solid since day one. I've never had any mechanical problems with it at all. It comes with extra belts, all new idler pulleys, all new jackshaft bearings. The unit was inspected by Vortech and everything was great. This is a full kit that comes with Split Second Engine Management, Vortech Aux. Fuel Pump, Vortech FMU, Spearco Intercooler, hoses, clamps, fuel/oil lines, blower, bracket, etc. Simply plug and play kit. I've ran the stock 3.33 pulley since day 1, so the blower was never abused. Even the intercooler is in like new condition, since it was covered by the stock bumper the whole time. If you want to see the real potential of this kit, I suggest going with bigger pullies for more boost. It has less than 10k miles on the kit. Condition is good for everything that it comes with. Blower has normal wear scratches on the metal that polished metal gets. It's almost impossible to keep polished metal scratch free. The are some deeper scratches on the underside of the blower from installation, but they are not visible once in the engine bay. Unit will be taken off within the month, sooner if I get a deposit from someone.
JWT Oil Pan spacer pre-tapped for oil return also included.
I also have an extra custom machined 2.87 pulley that I was going to use. I can throw it in for a little more $$$. This is not the Reichard Racing pulley that eats belts. It's a custom CNC machined pulley and has been proven to have no slip and little wear on belts.
Price: $3500. Located is Socal for local pickup.
![](http://i114.photobucket.com/albums/n273/idk216i/DSC03985.jpg)
![](http://i114.photobucket.com/albums/n273/idk216i/DSC03988.jpg)
Last edited by Dan_K; 12-10-2007 at 08:08 PM.
#6
Originally Posted by Dan_K
Non-Revup. You would need to buy a new bracket to fit the Revup models.
I also forgot I had a 3-gauge A-pillar pod that's included.
I also forgot I had a 3-gauge A-pillar pod that's included.
How much does this bracket cost?
I sent an email to vortech months ago asking about this and got no response.
#7
Join Date: Jan 2005
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 03vdub
How much does this bracket cost?
I sent an email to vortech months ago asking about this and got no response.
I sent an email to vortech months ago asking about this and got no response.
Trending Topics
#10
Join Date: Jan 2005
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Yes, direct fit to any non-revup model VQ. PM me alphamatt if you are serious and we can work something out. I prefer someone local, and you're pretty close.
If you wanted this to fit to a revup, you would need a new bracket at least. Call Vortech directly, but I am sure it's not more than a few parts to make it work.
If you wanted this to fit to a revup, you would need a new bracket at least. Call Vortech directly, but I am sure it's not more than a few parts to make it work.
#13
Join Date: Jan 2005
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kleicoupe
Are you willing to ship this kit? What else is needed to run this kit? Do you have any other pics? send me a pm if it is easier.
PM sent.