Custom rotora bbk 6 pot front 4 pot rear
#1
Join Date: Dec 2004
Location: nyc
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Custom rotora bbk 6 pot front 4 pot rear
Selling my custom ivory pearl powder coated bbk 6 pot front, 4 pot rear setup. This includes everything you see int he pics. The shop that removed it told me the pads are practically new. Setup has 5k on them. Reason for selling; I was told by a hack of shop a few months back that my bbk was damaged & needed it to be replaced. Foolish me went out & bought the ksport bbk to replace this with. I went for a 4 wheel alignment & was told the lines were loose going in the front drivers & passengers caliper & nothing was wrong with it. But since the brake fluid leaked, it lifted the powder coating on the rear of the front calipers a bit. When there installed, its not noticeable..but regardless for what i am asking for them..you can have them re powder coated & install new seals for less then 500 in any color you so choose to & still have a nice savings on your hand.These are as is & are priced to sell @ 2100 plus any shipping & paypal fees.
also have a tein with edfc for sale:
https://g35driver.com/forums/archived-sales/217772-tien-cs-edfc.html
also have a tein with edfc for sale:
https://g35driver.com/forums/archived-sales/217772-tien-cs-edfc.html
Last edited by dubs; 04-27-2008 at 10:49 PM.
#6
Join Date: Dec 2004
Location: nyc
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
getting hammered with a lot of questions on driver & my350z..so here it is:
http://www.thepowdercoater.com/ he can do amazing work for powder coating
Also I would recommend getting new seals if you are going to re-due the pc & that you would have to get from Rotora directly unless you know a good shop that deals with calipers & they could get the proper seals from you. also I'm not going to budge on the price..its low as is. So depending on where you live this will cost you 2163 ( price plus paypal) plus shipping rates. This can be shipped out this weekend.
http://www.thepowdercoater.com/ he can do amazing work for powder coating
Also I would recommend getting new seals if you are going to re-due the pc & that you would have to get from Rotora directly unless you know a good shop that deals with calipers & they could get the proper seals from you. also I'm not going to budge on the price..its low as is. So depending on where you live this will cost you 2163 ( price plus paypal) plus shipping rates. This can be shipped out this weekend.
Trending Topics
#8
Registered User
iTrader: (22)
Join Date: Dec 2006
Location: Eugene,Oregon
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dubs
getting hammered with a lot of questions on driver & my350z..so here it is:
http://www.thepowdercoater.com/ he can do amazing work for powder coating
Also I would recommend getting new seals if you are going to re-due the pc & that you would have to get from Rotora directly unless you know a good shop that deals with calipers & they could get the proper seals from you. also I'm not going to budge on the price..its low as is. So depending on where you live this will cost you 2163 ( price plus paypal) plus shipping rates. This can be shipped out this weekend.
http://www.thepowdercoater.com/ he can do amazing work for powder coating
Also I would recommend getting new seals if you are going to re-due the pc & that you would have to get from Rotora directly unless you know a good shop that deals with calipers & they could get the proper seals from you. also I'm not going to budge on the price..its low as is. So depending on where you live this will cost you 2163 ( price plus paypal) plus shipping rates. This can be shipped out this weekend.
how much does the seals gonna cost?? is it easy to fix it?
#9
Join Date: Dec 2004
Location: nyc
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by edindaclub
how much does the seals gonna cost?? is it easy to fix it?
#10
Littering and...
iTrader: (4)
Join Date: May 2006
Location: Raleigh, NC
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
What size are the rotors? Saw the front 6 pot comes in 355 but the rear can be either 330 or 355 as well (and some other sizes). They look identical in the pictures so I'm guessing 355 all around.
I am very interested, PM me if you have not got a buyer.
I am very interested, PM me if you have not got a buyer.
#12
Join Date: Dec 2004
Location: nyc
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
These are 355 or 14" all around. I asked the shop if there in working order & was told they were. But like I said if you were to re due the powder coat(IMO this color would only work on an ip car anyways) because some of it lifted on the rear of the front calipers due to an improper installed brake lines; you would or I should say it would be the smart thing to do & purchase new seals. You will have to call rotora & order the part. For what I am selling this for I figured it would be a no brainier.
FYI the steel brake lines come with the kit so I am selling it with it...you can see them installed on calipers in the pics.
FYI the steel brake lines come with the kit so I am selling it with it...you can see them installed on calipers in the pics.
Thread
Thread Starter
Forum
Replies
Last Post