Last weekend I swapped the stock airbox back into my friend's 2000 Maxima SE 5MT. He's not a car guy and didn't like the sound of the Stillen intake that came with the car. The Stillen intake is reportedly less than 1 y/o per the previous owner. My friend gave me the intake for helping him with a bunch of maintenance stuff. While this intake was made for the 1995-2003 Maxima, it bolts on just fine to the G/Z MAF sensor since the MAF bolt patterns have been the same for the VQ series since 1996. Shown is a picture of the intake installed on my car:



The intake includes the massive aluminum velocity stack used in the Stillen CAI for the G/Z and on JWTs POP charger for the G/Z.

The intake is in stellar shape. I cleaned the filter media, but did not apply the KN filter oil hence the reason the filter is grayish in color. The intake will be sold with the can of filter oil. The directions are not included, but install is pretty explanatory.

$60 (paypal) shipped in the lower 48. Will shipped via USPS priority mail. PM me or send an email to bronson.david001@gmail.com.

 

where is the airbox?

 

Triscuits? C'mon dude?

 

This is not the Stillen CAI made for the G35. This is Stillen's pop charger setup they sell for the 95-03 Maximas, but the MAF bolt pattern is the same. This is basically the $150 JWT popcharger, but without the metal heat shield they sell. The heat shield JWT sells can easily be fabbed with a $5 sheet of aluminum and insulation from Home Depot.

 

You didn't drive around with it? (after oiling it?)

 

Nope.