FS: Zapco Reference 750.2 - custom psu
#1
FS: Zapco Reference 750.2 - custom psu
Up for sale is a Zapco Reference 750.2 amp. The amp was sent to Zapco to have the powersupply modified to be able to operate down to 1 ohm stable (for all you 1.5dvc JL W7 guys). You can really get a ton of power out of this if you go that route. Anyway, price is $350 shipped/pickup. There is a minor surface scratch on one of the sides (not gouged/grooved at all), pics below. Sorry for the crappy cell pics, I will post up some others if I get a hold of a decent camera.
![](http://www.techelpdesk.com/zapco/zapco1.jpg)
![](http://www.techelpdesk.com/zapco/zapco2.jpg)
![](http://www.techelpdesk.com/zapco/zapco3.jpg)
Stereo, 4 ohms: 2x175 Watts
Stereo, 2 ohms: 2x375 Watts
Bridged, 4 ohms: 1x750 Watts
T.H.D. + Noise: <0.022%
S/N Ratio: >95dB
Slew Rate: >40V/uS
Damping Factor: >1000@4 ohms
Dimensions: 23"L x 7.5"W x 2"H
SymbiLink Balanced Inputs
RCA Unbalanced Inputs
2 ohm stereo stable
18 dB variable bass boost control
Dual variable electronic crossovers with x10 switch
Bridgeable
Three channel capable
High Current Bi-Polar output devices
Optically isolated MOSFET power supply
Aux output (Highpass/Lowpass or Fullrange)
Switch for use as stereo, single L ch. or R ch. bridge
L+R Sum Mono for use as a bass amp
Cooling fan allow any mounting position
Four layer PC board with heavy 2 oz copper
Surface mount technology w/1% resistors,
precision caps, and massive ground planes
*Symlink cable is not included
![](http://www.techelpdesk.com/zapco/zapco1.jpg)
![](http://www.techelpdesk.com/zapco/zapco2.jpg)
![](http://www.techelpdesk.com/zapco/zapco3.jpg)
Stereo, 4 ohms: 2x175 Watts
Stereo, 2 ohms: 2x375 Watts
Bridged, 4 ohms: 1x750 Watts
T.H.D. + Noise: <0.022%
S/N Ratio: >95dB
Slew Rate: >40V/uS
Damping Factor: >1000@4 ohms
Dimensions: 23"L x 7.5"W x 2"H
SymbiLink Balanced Inputs
RCA Unbalanced Inputs
2 ohm stereo stable
18 dB variable bass boost control
Dual variable electronic crossovers with x10 switch
Bridgeable
Three channel capable
High Current Bi-Polar output devices
Optically isolated MOSFET power supply
Aux output (Highpass/Lowpass or Fullrange)
Switch for use as stereo, single L ch. or R ch. bridge
L+R Sum Mono for use as a bass amp
Cooling fan allow any mounting position
Four layer PC board with heavy 2 oz copper
Surface mount technology w/1% resistors,
precision caps, and massive ground planes
*Symlink cable is not included
#7
Trending Topics
#9
Damn, that's the size of a skateboard.... How long is that amp?
Answer:
23"L x7.5"W x 2"H
BTW< this thread is 2 months old... might have been sold alreadY!
Answer:
23"L x7.5"W x 2"H
BTW< this thread is 2 months old... might have been sold alreadY!
Last edited by Jamaica2G; 10-18-2009 at 10:32 AM.
Thread
Thread Starter
Forum
Replies
Last Post
alxmlr789
20 Inch
9
01-26-2016 10:04 AM