FS: vORTECH SUPERCHARGER
#1
FS: vORTECH SUPERCHARGER
Complete Vortech Supercharger For Sale Comes With The Ff:
New Intake For G35
New Serpintine Belt
New Cog Belt
Autosport Harness With Ss Already Wired Up
*****about 12k Miles On Supercharger. Installed And Uninstalled By Streetimage Located In Baldwin Park.
Vortech Supercharger (with Everything Above) =$3200.00 SOLD!
STREET IMAGE INSTALL COST =$1200.00
AP 14.25'' 2pc 6 PISTON FRONT (RED) AND 13' 1pc 4 PISTON REAR (RED) BBK WITH STEAL BRAIDED LINES (4) =
NEW front $2,795.00 new rears = $1,870.00= total = $4665.00
for sale = $3000.00 FIRM SOLD
Dual Gauge Pod With Blitz Oil/fuel Pressure And Blitz Egt (needs New Sensor On Egt) I Can Trade You My Stock Cats That Has The Bung Already Welded For The Egt To Tread Right In. = $300.00
Aem Wide Band Air/fuel Guage With Carbon Fiber Gauge Housing = $280.00
Motordyne 1/2 Spacer With ARP Bolts (no Gasket) =[B]SOLD![/B]
19x10.5 Volks Sf Challenge
19x9.5 Volks Sf Challenge In Very Good Condition =$2600.00 SOLD!
TEIN FLEX WITH EDFC = $1500.00 SOLD
NISMO HEADERS (REAL THING) = SOLD!
Nismo Sway Bars Front And Rears = SOLD!
Nismo Rear Diffuser (primered Black) =$300.00 SOLD
Ip Gialla Grill WITH NISMO EMBLEM = $270.00 SOLD
Ip Greddy Front Bumper = SOLD!
Ip Greddy Side Skirts = SOLD!
PLEASE SERIOUS BUYERS ONLY AND I PREFFER LOCAL BUYERS BUT WILL CONSIDER SHIPPING. ALL PRICES ARE WITHOUT SHIPPING.
PM ME IF YOU HAVE ANY QUESTIONS. I WILL POST PICTURE LINK ON ALL FOR SALE ITEMS LATER. THANK YOU!
New Intake For G35
New Serpintine Belt
New Cog Belt
Autosport Harness With Ss Already Wired Up
*****about 12k Miles On Supercharger. Installed And Uninstalled By Streetimage Located In Baldwin Park.
Vortech Supercharger (with Everything Above) =$3200.00 SOLD!
STREET IMAGE INSTALL COST =$1200.00
AP 14.25'' 2pc 6 PISTON FRONT (RED) AND 13' 1pc 4 PISTON REAR (RED) BBK WITH STEAL BRAIDED LINES (4) =
NEW front $2,795.00 new rears = $1,870.00= total = $4665.00
for sale = $3000.00 FIRM SOLD
Dual Gauge Pod With Blitz Oil/fuel Pressure And Blitz Egt (needs New Sensor On Egt) I Can Trade You My Stock Cats That Has The Bung Already Welded For The Egt To Tread Right In. = $300.00
Aem Wide Band Air/fuel Guage With Carbon Fiber Gauge Housing = $280.00
Motordyne 1/2 Spacer With ARP Bolts (no Gasket) =[B]SOLD![/B]
19x10.5 Volks Sf Challenge
19x9.5 Volks Sf Challenge In Very Good Condition =$2600.00 SOLD!
TEIN FLEX WITH EDFC = $1500.00 SOLD
NISMO HEADERS (REAL THING) = SOLD!
Nismo Sway Bars Front And Rears = SOLD!
Nismo Rear Diffuser (primered Black) =$300.00 SOLD
Ip Gialla Grill WITH NISMO EMBLEM = $270.00 SOLD
Ip Greddy Front Bumper = SOLD!
Ip Greddy Side Skirts = SOLD!
PLEASE SERIOUS BUYERS ONLY AND I PREFFER LOCAL BUYERS BUT WILL CONSIDER SHIPPING. ALL PRICES ARE WITHOUT SHIPPING.
PM ME IF YOU HAVE ANY QUESTIONS. I WILL POST PICTURE LINK ON ALL FOR SALE ITEMS LATER. THANK YOU!
Last edited by djreinx; 04-20-2006 at 06:43 PM.
#2
how firm is your price on the blower?? im pending a sale on one for 2800 plus shipping from the east coast...if shipping is too much id rather get it through someone local, id feel safer that way as well....
#3
papagz,
very firm because im including all the new stuff with it. ie harness =375 brand new so u dont want to cut up your harness and also i didnt mention the ARC($450) oil pan which has the oil drain line already aluminum welded to it. also the kevlar dash10 lines with fitting for that line. and i might be able to hook u up with prof. install also if your not going to do this in your garaGE.
sorry but price is firm.
very firm because im including all the new stuff with it. ie harness =375 brand new so u dont want to cut up your harness and also i didnt mention the ARC($450) oil pan which has the oil drain line already aluminum welded to it. also the kevlar dash10 lines with fitting for that line. and i might be able to hook u up with prof. install also if your not going to do this in your garaGE.
sorry but price is firm.
#6
i have few guys interested in the sways and some other parts. i'll entertain all "dibs" untill i actually sell it. let me know, my best friend also owns a body shop in s. el monte for the exterior parts. the grille should match ip paint but the front and side needs to be color match with any colored coupe.
thanks for the relpy guys.
thanks for the relpy guys.
#7
how off is the color of the side skirts to the IP? would i have to do some blending or would i be able to throw them on and have a good match? i figure it wont be perfect cuz each IP is different because of fading and what not
Trending Topics
#10
Registered User
iTrader: (11)
How did you like the Tien Flex and EDFC? How much different is the ride? Would your set up fit or could it be adapted to a 05' sedan?
#11
the tein flex rode very good i like the stiffness n also confortable cruising ride. im not sure if it will fit 05 sedan.
the install on the charger is $1200.00 for street image. very good shop i recommend them
the install on the charger is $1200.00 for street image. very good shop i recommend them
#13
#14
supercharger pix
http://i7.photobucket.com/albums/y25...1406_19081.jpg
http://i7.photobucket.com/albums/y25...1406_19151.jpg
http://i7.photobucket.com/albums/y25...ntercooler.jpg
http://i7.photobucket.com/albums/y257/djreinx/bov.jpg
http://i7.photobucket.com/albums/y257/djreinx/fmu.jpg
http://i7.photobucket.com/albums/y25...nx/pipings.jpg
http://i7.photobucket.com/albums/y25...nx/harness.jpg
http://i7.photobucket.com/albums/y25...1406_19072.jpg
http://i7.photobucket.com/albums/y25...1406_19071.jpg
http://i7.photobucket.com/albums/y25...1406_19081.jpg
http://i7.photobucket.com/albums/y25...1406_19151.jpg
http://i7.photobucket.com/albums/y25...ntercooler.jpg
http://i7.photobucket.com/albums/y257/djreinx/bov.jpg
http://i7.photobucket.com/albums/y257/djreinx/fmu.jpg
http://i7.photobucket.com/albums/y25...nx/pipings.jpg
http://i7.photobucket.com/albums/y25...nx/harness.jpg
http://i7.photobucket.com/albums/y25...1406_19072.jpg
http://i7.photobucket.com/albums/y25...1406_19071.jpg