D3 + Bose system not loud enough
#1
Join Date: Sep 2006
Location: nYc
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
D3 + Bose system not loud enough
Hey guys I recently replaced my head unit with an Avic-D3. I used the metra harness to connect it to the stock amp/speakers. The issue I'm heaving is that even when I have the volume set at 40, the system is not very loud. I remember the being louder if I turned it up with the stock head unit. Any advice/solution?
#4
Registered User
iTrader: (3)
Join Date: Feb 2007
Location: Upper Darby
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Something might be funky somewhere, My D3 sounds 10X louder than the Premium Bose HU... Did you splice your wires or use the aftermarket radio adapters? IDK what the situation is but is should be the other way around, I can't even turn my D3 past 30 cause its so loud unless I'm trying to impress somebody.
#5
#7
Trending Topics
#9
Originally Posted by kernel843
Can we hook up a 4 chanel amp to the stock bose speakers? I've got one from my old car I can use. Haven't gotten my D3 yet, but I want to plan my install options.
#11
Something might not be grounded well. Check that out. Also, just re-check all your cable connections. Maybe something came loose. I have not done my install yet in my car (waiting for all my parts to come in), but from what I have seen and heard, it should be a lot better sounding even with the Blows amp and speakers.
Also, as to the other question about an aftermarket amp and bose speakers, you can do it, but you have to make sure the amp you have can put out the ohms needed for the bose speakers. Be careful with it.
Also, as to the other question about an aftermarket amp and bose speakers, you can do it, but you have to make sure the amp you have can put out the ohms needed for the bose speakers. Be careful with it.
Thread
Thread Starter
Forum
Replies
Last Post