Hi
Just wonderin if theres' a way to make chirp sound different (when locking/unlocking the car). Instead of the horn that sounds "poot-poot", I want it "beep-beep" like a digital sound, like the ones they use for benz, beamers, lexus and other luxury cars. Is there a thingy that needs to install, replace, etc?

 

http://kptechnologies.com/

 

^click products then electronic beep =]

 

cool! thanks man! problem solved

 

How do you hook that up by the way?

 

i checked out the installation guide and it looked complicated to me,. but i will look for the car's repair manual, maybe it will help to look for the right wires.

 

If you are familar with vehicle wiring it is one of our easier modules to install.

You need to tap the door lock actuator, door unlock actuator, ground, constant power, and switched power. The only difficult part is running the beeper through the firewall and under the hood.

 

Am not a techy guy, so Im gonna have a problem looking for these wires in my car. If there's a DIY with a piture walkthru, that would be awesome

 

DIY with picture walk throughs don't work too well with this car. The wiring is right at the BCM and there are multiple wires of the same color there, so you can't simply go on wire color. This is a module that you must relay on a volt meter to install correctly!

 

eeek! sounds scary! LOL! Any shop that you suggest to install it? I may not be able to install this.

 

You would be best off asking someone in a local forum to recomend a local shop. An alarm shop shouldn't have any issues installing this!

 

ok, thanks!