How to find out if I have SAT or installed in my car

Subscribe
Sep 9, 2008 | 08:18 AM
  #1  
HI there

I have a imported 2006 Model (G35 Coupe) in Germany and I was wondering how to find out if I have the Sat installed in my car or not.Since I live in Germany the Sat will not work there at all but now I wanna install my PAC NIIS 2 Adapter with a aftermarket DVD Player and I dont know if I should put the switch on the PAC Unit for the SAT to off or on.
I hope someone can tell me how to find this out.

Theres also a blue/balck wire on the PAC harness which is for Aux 1 (-) remote output do I simply have to ground this one?
Reply 0
Sep 9, 2008 | 01:55 PM
  #2  
If it is a USDM car, it is prewired already.
Reply 0
Sep 9, 2008 | 03:17 PM
  #3  
thanks for your fast answer.what do you mean with USDM.the car is imported from the USA.
I only need to know if I have to put the Switch on the Pac Unit to on or of for the SAT.
Reply 0
Sep 9, 2008 | 05:40 PM
  #4  
US Domestic Market. Your car is USDM if it was originally made from the USA.

For the PAC unit, you need to pull the radio out and plug the PAC into the back of the radio.
Reply 0
Sep 10, 2008 | 09:51 AM
  #5  
Ok thanks now I understand what you mean.
I already know that I have to install the Pac Unit behind the Radio Headunit but I still need to know if I have to put the switch at the Pac Unit to Sat or no Sat.And I also have to know if I have to connect the two cables on the PAC Unit which are not plug and play.
Reply 0
Sep 10, 2008 | 03:09 PM
  #6  
I just installed it yesterday. so if you have sat service then put the switch on pac to sat; otherwise, put it on no sat. The Sat button in your car is the switch to turn on /off for the pac so don't bother to put another switch. Good luck!!!!!!
Reply 0
Subscribe