No audio from Nav after doulbe din install. Help
No audio from Nav after doulbe din install. Help
Just finished installing an after market Head unit. I followed the double din DIY. Nav works but I no longer have the voice guidence. Everything else works fine. Any one else have this problem and is there a way to fix it.
Registered User
Joined: Oct 2003
Posts: 338
Likes: 0
Re: No audio from Nav after doulbe din install. Help
The only solution I've seen for this is to add a small dedicated amp and speaker for the navi voice by tapping into the factory wires that were disconnected from the Bose HU.
-- Rob
-- Rob
Registered User
Joined: Oct 2003
Posts: 884
Likes: 3
From: Virginia
Re: No audio from Nav after doulbe din install. Help
When you are replacing the stereo, there are several connectors you have to deal with. One of them should have been a white 32 pin connector. Wires 32 (blue with white stripe) and 30 (white with black stripe) of that connector are the + and - signals from the NAV. What did you do with those?
You could connect those directly to a small external speaker to get the NAV voice back. But then, you will want to mute your stereo when the NAV is speaking. I don't know how to do that with your head unit, but wire 31 (blue) in the same connector is grounded when the NAV is speaking.
HTH
2004.5 DG/G 5AT Coupe with all options
Sidemarker turnsignal mod
GroundingGear™
2003 Yamaha YZF600R
You could connect those directly to a small external speaker to get the NAV voice back. But then, you will want to mute your stereo when the NAV is speaking. I don't know how to do that with your head unit, but wire 31 (blue) in the same connector is grounded when the NAV is speaking.
HTH
2004.5 DG/G 5AT Coupe with all options
Sidemarker turnsignal mod
GroundingGear™
2003 Yamaha YZF600R
Re: No audio from Nav after doulbe din install. Help
So wires 32 and 31 connect to a dedicated speaker and wire 31 would connect to the Mute wire (brown on the Kenwood DDX7015) on the after market HU. Right?
G35driver.com Moderator
Joined: Nov 2002
Posts: 3,476
Likes: 0
From: Mishigan
Re: No audio from Nav after doulbe din install. He
Zen, in theory yes, check this thread here:
https://g35driver.com/forums/showfla...sed&sb=5&part=
<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/350Z-intake/AVIC-N1-double-din
https://g35driver.com/forums/showfla...sed&sb=5&part=
<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/350Z-intake/AVIC-N1-double-din
Registered User
Joined: Jan 2004
Posts: 1,254
Likes: 19
From: Centerburg, Ohio (the geographical center of the Buckeye State)
Re: No audio from Nav after doulbe din install. He
yeah..... I don't know how to remedy this problem since I personally don't have nav.
No stock nav coverage, Sirius, XM in Hawaii.
doc
No stock nav coverage, Sirius, XM in Hawaii.
doc
Re: No audio from Nav after doulbe din install. He
I will make it work!!! I'm just not looking forward to taking the dash apart again.
Trending Topics
G35driver.com Moderator
Joined: Nov 2002
Posts: 3,476
Likes: 0
From: Mishigan
Re: No audio from Nav after doulbe din install. He
haha...dont worry, the more you take it apart, the easier it gets, doc and i had a competition....
he took it apart in 5 minutes, i took it apart in 4:59 lol
its VERY easy to do the 5th and 6th time around [img]/w3timages/icons/wink.gif[/img]!
<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/350Z-intake/AVIC-N1-double-din
he took it apart in 5 minutes, i took it apart in 4:59 lol
its VERY easy to do the 5th and 6th time around [img]/w3timages/icons/wink.gif[/img]!
<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/350Z-intake/AVIC-N1-double-din
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM
DEMoLITIoN
Audio/Video/Electronics
8
Apr 20, 2016 06:57 PM
FS[SoCal]: D/S 4080 Enclosure & JL Audio W6v2 10 inch
MrIP35
Audio/Video/Electronics
9
Nov 8, 2015 10:47 AM
