O Hella OEM, My gap is exactly like yours. I have a HUGE gap on the bottom but since my Pioneer's monitor angles out, the installer told me that I can't fill in the hole.

 

thats where the black adhesive weatherstrip foam works so well. the face can tip and push it alittle and does no harm, yet still blocks the view behind the bezel. the foam is put on the bottom of the radio. how far back depends on your radio. On the JVC with removable double din, I had to put the foam almost behind the lip of the bezel. but again, it makes it look so much better.

 

I'm pretty sure I've seen angling monitors flush mounted.

Ask G35 Pilot - his pictures don't really show if there's still a gap:

 

my dnx7140 has a gap too but my DD has reverse tilt so it needs some room.
just make sure you cover the back part with the supplied plastic trim so the inside cant be seen

 

I've seen dd setup with movable screens flushed too, I just don't understand how mine wasn't. I guess he put my shift **** into account to when installing, I can insert a CD on park, a lot of people said they couldn't. My dd didn't come with a trim, I bought the scorsche trim ring

 

Sorry to bring an old thread back but had a question regarding fitment of the left panel of the console. The top of mine does not seem to sit flush with the vent such as the pics above. any reason that could be. thx

 

A picture of what you're talking about would help a lot.

 

If you look at the last pic in my post to the left of the top compartment the panel that pops in to the side of the console mine does not sit flush with the vent as the one shown above is.

Thx again

 

Again. Picture would help.

Check out the radio removal video and follow the steps to remove the trim and re-seat it.

 

will do thanks again for the help