Well i have a Kenwood DDX6019 Double Din that im planning on putting in my 05 G35 Coupe. I also have the dual function controller and faceplate on the way, but my question is if anyone know if there is a wiring harness for the Kenwood to the g35? Or if im gonna have to connect each wire one by one. Does anyone know where i can find a step by step instructions for the install? Ive done searches...

Thanks

 

anybody?

 

Funny, I just did a quick search and came up with this

https://g35driver.com/forums/audio-v...ll-i-need.html

this

https://g35driver.com/forums/audio-v...-05-coupe.html

and

https://g35driver.com/forums/audio-v...8120-woes.html

Good luck... and remember to keep the search local to the forum section you're interested for the best results

 

stickies on DDin conversion are easily available...

also search "Double din," "metra harness"

all within this forum

 

thanks tiguy

 

There is a wire harness adapter that you need. there is one for the Bose cars and one for non-Bose. You'll also need a Nissan antenna adapter and a PAC-Audio SWI-JACK to use the steering wheel controls. You will have to connect each wire of the harness adapter to your Kenwood, including the power antenna wire, but then you'll just plug the entire thing into the factory harness.

 

is this what i need? also the antenna adapter says 2007 and newer im a 2005, do i need it?

 

The only thing I disagree with Gilley on is the harness for bose and harness for non bose... both will work. one will work better than the other depending on your deck
if you go with metra/best kit parts look for 7550 or 7551 if you get a deck HIGH VOLT PREOUTS <-- very important - 4volt or better ONLY - I believe the antenna adapter number is 9 (ie best kits uses part number BAA9).
if you have any more questions. PLEASE search first as I has gone through the wiring harness on numerous occasions. search "7550" or "7551" + "harness" I'm sure a bunch of threads will show up.
if those don't sort you out feel free to pm me