<font color=green>-Rambo</font color=green>
G35c-6MT-DG/Willow/HyperGround/BorlaExhaust/350Z-intake/AVIC-N1-double-din

 

I wanted to replace my stockers but I don't like cutting wires so here's what I did to get around that problem...

Here is the stock bose, has the mounting holes and the connector interface you'd want for both the front and the rear speakers.

2004 DG G35 Coupe, Premum, Sport, Aero.

370828-DSC02313.JPG

 

Connector interface


2004 DG G35 Coupe, Premum, Sport, Aero.

370829-DSC02314.JPG

 

First start off by cutting each spline attaching the Bose speaker to the plastic housing as shown.

2004 DG G35 Coupe, Premum, Sport, Aero.

370835-DSC02316.JPG

 

Next remove the old Bose speaker with the wimpy magnet

2004 DG G35 Coupe, Premum, Sport, Aero.

370842-DSC02317.JPG

 

Using either screw or JB Weld (or equivalent) attach your new aftermarket speaker to the Bose housing

2004 DG G35 Coupe, Premum, Sport, Aero.

370845-DSC02320.JPG

 

New speaker mounted to Bose housing

2004 DG G35 Coupe, Premum, Sport, Aero.

370850-DSC02321.JPG

 

Finally solder the speaker wire to the stock speaker connector as shown, (notice the nice big magnet), be sure you have the correct polarity shown here (red - positive, black - negative).

This speakers are seperates with two tweeters, I left one in the center cone, and the other will go in the stock tweeter location. No cutting, just mount and click into the stock harness. Have fun...

2004 DG G35 Coupe, Premum, Sport, Aero.

370858-DSC02323.JPG

 

What size is the stock speaker and what size did you replace it with?

 

Stocks are 6.5, I replaced the fronts with 6.5 inch separates, and the rears with 6 inch coaxials.

2004 DG G35 Coupe, Premum, Sport, Aero.

 

The JPG links don't seem to work anymore