I have a 04 sedan

I did the " add a sub to your stock Bose system"

And I recently got a kicker am zx750.1 with kicker 2 12" cvr
It has a 4 gauge wire

The problem I'm having

Is that it flickers to protection mode
And the bass **** doesn't work n I know the bass *** isn't broken


Any one can help me. Thanks

 

U check the fuse on the amp?

 

All fuses working

 

If it's flickering it sounds like something might just be shorting out - I'd start by checking all your wiring. Power, ground, speaker wire, and remote for any exposed area that could be touching metal somewhere. It could be that the vibrations from driving are making something touch. Bass **** might be unrelated.

 

so i recheck the wires n called a frin of mine . n he said chck the ohm wiring

since it was dual 2voice ohm . i had to wire it a different way. . i wired both positive 2gthe n both negative 2gtha

and so far it doesnt flicker into protection mode only if i bass boost half way and the same with the gain

but the thing is n ow that the bass **** doesnt work..

still no clue

 

If it's always cutting out and the protect light on, your sub is possibly too low of ohms for the amp to support. How are your 2 12's wired up? If you're in parallel (1 ohm load) then it's almost certainly too low for the amp.

 

i wired it 2 wires .. 1 wire just for the positive n 1 wire just for the negative . twisted at the end 2tha .
and into amp

i had it wired differently and it was flickering n wat not when i tryed putting the gain n bass boost up


after i wired howed i mention ^ it doenst flicker but // my bass *** isnt working now.
i ahve 2 bass *** n i know both work..
wat do u think

 

In English please?

Pictures might help too.

 

try this

run one sub on your next drive.

if everything works fine you need to check the wiring on the subs

later, try the other sub alone and see what happens.

make sure both subs are dual 2 ohm or dual 4 ohm. If they are different that can cause some wiring issues