i have an 05 g35s and im following docrons guide

im stuck on this part


my cup holder isnt attached to the same place

help please

 

All you have to do is 1. take off the shift **** 2. Just Push down on the Black plastic where it meets the alum. trim. (behind the alum trim.) This will disingage the metal clips. Or use a small screwdriver. but be careful not to stract it. One those 2 clips are off just move the shifter to Neutral, then pry up the trim.. it comes off very eazy..

Hope that helps.

 

You workin on an AT or MT?

 

sorry i have teh "willow" interior would you mind describing in willo terms please

 

AT sir

 

On the 05 all you need to do is remove the shift **** put it neutral and then pull up on the shifter assembly....

It should look like this when removed....well sort of.

 

ty is the end of it a bit harder to pull off? seems to be a sticklr

do i pull up or at myself

 

Pull up on the front by putting something flat underneath (I used flat screwdriver) and pull towards yourself for the back part, make sure it in neutral other wise it will not come off....

 

wtf teh screw on the left aint budging its like glued down :-\
i went for that one first too

 

dewalt <3