Nice and detailed, Thanks!!!!!!!

 

so this means when i have the sirius cut out under bridges, my ipod would cut out!>!??!! wtf

 

great guide.

 

mr boca coupe.....you will not lose sound from the ipod if you go under a bridge while you're listening to it....the dilema is, when you initially turn the radio on, and you're in an area that has no satellite signal, the ipod wont work...but once the car has a clear signal for satellite, then you'll be able to listen to the ipod and it will not cut off.....for some reason, the ipod needs the initial sat signal to start.....i dont know why.....

 

Absolutely USEFULL information and pics. YOur're a credit to the forum, thanks Mucho!!!

 

are screws univiersal for the dash, or will you have to remember what came from with holes

 

uhmmm....dont remember..but i think they were all the same....(radio and from side panels.....did you drop one???.....it was kinda tricky taking out the ones on the upper right and left coners and also the top one.....i guess use a screw driver that has a magnet component to it....(i had one connected to the front of my screw driver)

 

Will this setup work on a non-satellite OEM radio? I'm hoping there's an unused or auxiliary input on the back of the head unit but haven't actually poked around to ascertain this.

 

Your DIY guide worked like a charm!

I drilled a couple of holes and ran the ipod connector through the cupholder closest to the driver.

I picked up a padded proclip mount for my 30gb 5G ipod. I used double sided tape to mount it to the underside of the cupholder lid. I can close the lid and still have use of one cupholder.

 

hey mice 99...post some pics!!!...was just wondering how it looked

 

Alright guys i have an 04 g35 with navi. I have a button for sat but i dont have a sat put in. Would i be able to use the sat button for the ipod connecter, because im not going to get satellite radio in the near future and dont plan on to thanks for the help.

 

there is a switch on the pac module that switches between sat and no sat....but make sure its compatible with an 04....

 

Here are some pics:

 

Excellent DIY guide! The pictures were fantastic and made the whole process incredibly easy!

 

why do we have to shift to drive and remove the negative terminal? just wondering.