Yeah, it's pretty easy if you want it to blink. You can also go with two rows or alternating LEDs for blinking like I did here

 

nice mod i just bought my led's!

 

awsome looking mod

 

Just bought a set of these LED's yesterday and looking to do this mod. little confused on some parts and wondering if someone could answer. The 194 LED holder part... how does that connect to the wire given that comes with the LED bar? Is there anything else I could use if I don't have any LED holders? Which part do I connect the wire too on the LED bar? It seems that the wire is connected to only 2 of the wire prongs and the other 2 are... it seems to be laying on black electrical tape. If anyone could help me out, let me know. Thanks

 

do you think the stock bulbs used on the side markers would work for the 194 holder? I could just pull the bulbs out and use those. Would they work??

 

i have same question as far as connecting it to the bulb holder, how did you go about doing it? other than that looks like great diy, can't wait to try it.

 

tried doing this mod. let me tell you, it does not work on the sedan lol. The markers are much thinner and skinnier and cannot house the LED bar. I'm trying to figure out a different way to put it in there but I used a spare set to test fit first.

 

to anyone who's done this ... succesfuly at least lol.. i had a couple q's
which model did u guys get from superbrightleds.com cuz i see one that resembles the ones posted ... and one that doesn't but looks familiar. one is 24 bux and one is 4.. don't know which is which. if neone could point out which ones please.

RLB series Rigid Light Bar
or
LB3 series LED Light Bar

also, do i have to buy the wires and mount separately. cuz i know it says they came together but maybe he meant he ordered them separate and came together. any help please, eager to get the parts and get started on the mod

thanks.

 

pm sent

 

ignore led holder part...
you can use anything...there are heated shrink wire connector..or wire connector that secure water...be creative
my led holder don't secure water so its not a good idea...

 

okay i just placed an order for the parts along with other leds for license plate, etc etc tired of that **** yellow all around lol. i dont know what u mean by "secure water" but once i get the parts and try and do that **** im sure i'll find out.. plus i PRAY this works only got one pair of clear corners.. if this goes to ****.. back to orange i goooo!!

 

This seems like pretty cool little project that can make a nice difference. Just ordered my lights and will give it a try. Thank you.

 

Theirr heeeeere they send me 3 led bars instead of 2 lol i only paid for 2 tho along with trunk, ovhead cabin lights, door jambs.

 

nice write up

 

anyone have pics of the WARM WHITES?