Here is a cheaper option you might want to consider:

http://infiniti.sewellparts.com/acce...2004/4659.html

I just installed them with my Akebono BBK today, and will test them out tomorrow.

 

How long did the install take you guys? I can handle most DIY's but it would need to be done within a day. Thanks!

 

I'd never really worked on a car and i had to install spacers so it took me a good 12 hours. I would say do it with a strong friend and a breaker bar or if you had an impact wrench you could probably knock it out in 6 hours for sure. Just lay everything out and a have a good plan of attack.

 

What offset do your rim have to be I have 35 and 5mm spacers still don't fit

 

Very nice write up..

 

Easily done in a day. If everything is set up, 4-5 hours. I have an FX so no shields to cut nor brackets to install, but I did the fronts in a little over 1 hour. I used a cheap electric impact gun since getting a breaker bar into the wheel well is troublesome.

Just do the fronts first, then rears. That way if it runs long you can just drive it around until you have time to finish.

 

Hey guys,
Here is a pic of the Fueled Racing brackets I received the other day. These are SWEET !!!
http://www.fueledracing.com
I'm 1 step closer to actually doing the BBK conversion!

 

do they fit on stock g35 rotors? and where could i order the whole kit from? thanks

 

NO the Akebono BBK will not work with the factory rotors. You will need to get the larger rotors.

Here is the kit---> http://www.z1motorsports.com/350_g35...oducts_id=4626

 

Where did you get the bracket from? Lookin into doing this mod now! Great write up!

 

This is where I got mine http://infiniti.sewellparts.com/acce...2004/4659.html

 

How'd you like them? Gonna order them this week

 

Well I've had them on for almost two years. Absolutely no issues and they seemed like quality parts for a 1/3 of the price as some. Id recommend them no problem!!

 

Awesome ordered brackets last night so this conversion will be started soon. I called in to get prices on rotors and we need them off a 370z or g37s I'm assuming rwd option but it's giving me a L and R at the end of part number to tell me which side. Are they directional rotors when we do this mod?

 

i think the vanes may be. also do you have shorter banjo bolts for the brake calipers?