Thanks for clearing that up.

I think I will go with the G35 Coilovers and just not have the car that low. My goal is to aesthetically close the gap between the wheels and stiffen the suspension up a bit.

 

how do you know if you have sport suspension. i bought my car used. its a 05 automatic.

 

im thinking the 350 h tech are the way to go. i just got my 19 inch wheels. i just want to get rid of some wheel gap. i dont want a rough ride or have to worry about camber.

 

you should have orange stitching on your steering wheel

 

so if my 04 has brembo that means i have the sport suspension rite?

 

No sport suspension was offered in 03-04

 

does anyone have pics of a car with htech springs and some 19inch wheels. i want to see how much of a wheel gap there is. i searched but couldnt find anything. i dont know what suspension to get .i want to get rid of the wheel gap and have a comfortable ride. dont know if i should get stech or htech. and do i need camber kit. im a g35 newbie

 

At the beginning of this thread there is a link to another thread and the guy had some G35 htechs....He had the stock 18's though.. ...A buddy of mine has the G35 stechs...do a search for nyckid....I think he posted pics a while back of his ride...Hope this helps!

 

The tein web site has the 350Z H-techs as a -0.3F/-0.2R drop, while the
h-tech specs for the G35 is -0.6F/-0.3R. Are these specs still accurate?

Everyone states go with the 350z h-techs, stating it sits a bit lower than the G35 h-techs. Initially, from the specs above, it does not look like it.

The only thing I ca assume is that the 350z already sits lower than the G35 at stock height and does not need a dramatic drop to get rod of the wheel gap and thus the -0.3F/-0.2R spec.

I am looking to buy ASAP.

Can someone please clear this up for me?

Thanks

 

you must have missed the part where you have to add 1/2" to all 350z drops if you install them on a coupe, so the 350z-htechs should drop a coupe .8/.7, but don't expect that much drop in the rear and be prepared to do the springmount mod to even up the drop.

 

I love the PRo Kit. Its a perfect drop with my 20s and is perfect for a daily driver.

 

Could you please explain what the springmount mod is? Thanks. I will search at the same time. Thanks!

Nevermind... i found your thread. How much of finger gap did you have before you did the spring mount mod?

Thanks!