Aftermarket sways = endlinks going bad?
#32
From experience:
1) There is a revised part number for the 05 rear links. I assume it is a revised part.
2) My Stillen sways did make my rear links go bad. Basically, I got a thunk from one side when I would go over uneven pavement. Once I put the new OEM links on I have had no problems.
I was running med/med when the link failed and since then I have been running med front and stiff rear.
Could never go back to OEM body roll, no matter how many end links I need to replace.
Now, get a front strut bar and see how good the handling can really be!!!
1) There is a revised part number for the 05 rear links. I assume it is a revised part.
2) My Stillen sways did make my rear links go bad. Basically, I got a thunk from one side when I would go over uneven pavement. Once I put the new OEM links on I have had no problems.
I was running med/med when the link failed and since then I have been running med front and stiff rear.
Could never go back to OEM body roll, no matter how many end links I need to replace.
Now, get a front strut bar and see how good the handling can really be!!!
#33
Originally Posted by JZ39
From experience:
1) There is a revised part number for the 05 rear links. I assume it is a revised part.
2) My Stillen sways did make my rear links go bad. Basically, I got a thunk from one side when I would go over uneven pavement. Once I put the new OEM links on I have had no problems.
I was running med/med when the link failed and since then I have been running med front and stiff rear.
Could never go back to OEM body roll, no matter how many end links I need to replace.
Now, get a front strut bar and see how good the handling can really be!!!
1) There is a revised part number for the 05 rear links. I assume it is a revised part.
2) My Stillen sways did make my rear links go bad. Basically, I got a thunk from one side when I would go over uneven pavement. Once I put the new OEM links on I have had no problems.
I was running med/med when the link failed and since then I have been running med front and stiff rear.
Could never go back to OEM body roll, no matter how many end links I need to replace.
Now, get a front strut bar and see how good the handling can really be!!!
How much did the OEM end-links cost?
How many miles were on your car when this issue accrued?
I just bought some sways and I am debating if I should replace the end-links when I put them on; my car has 60k miles on her.
#35
chairman roflmao
iTrader: (1)
Join Date: Sep 2005
Location: San Jose, CA
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried the Nismo end-links? Will they work with the Stillen sways? They seem pricey, but worth a shot. They're adjustable also:
http://mynismo.com/products/?id=5229
http://mynismo.com/products/?id=5229
#37
Originally Posted by bambam26
I called the Infiniti in Orlando about the end links the OEM are 35 a piece for the front and 35 a piece for the rear. The front ones are the same for the 03-06 the rear are different form the 03-04 and the 05-06.
#38
Registered User
iTrader: (3)
Join Date: Sep 2006
Location: Atlanta, GA
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Well after getting under the car I found that the 05 end links won't fit on my 04. The weird thing is I call infiniti and they said that the brackets are the same for all years. The bolts on the 05's are thicker than on the 04 so they will not go through the brackets I am totally confused on this.
#39
Originally Posted by bambam26
Well after getting under the car I found that the 05 end links won't fit on my 04. The weird thing is I call infiniti and they said that the brackets are the same for all years. The bolts on the 05's are thicker than on the 04 so they will not go through the brackets I am totally confused on this.
#41
Originally Posted by bambam26
Nope the brackets are the same parts numbers. i am really stumped I am going to look again and take pics along as I can find my digital camera. I talked to the parts person at the dealer and the brackets are the same for 03 up.
#43
Registered User
iTrader: (3)
Join Date: Sep 2006
Location: Atlanta, GA
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Well this is were things get weird. I took them back today. the guy showed be the computer the 04 an d 05 have the same rear endlinks. So the skinny ones are going on the back. The thick ones he gave me are for a 04 he said he showed me the computer again the 04 one's are thick as hell. I have to put them on still but I know the ones that are on there now are skinny as **** so I really don't know what to think..
#44
Originally Posted by bambam26
Well this is were things get weird. I took them back today. the guy showed be the computer the 04 an d 05 have the same rear endlinks. So the skinny ones are going on the back. The thick ones he gave me are for a 04 he said he showed me the computer again the 04 one's are thick as hell. I have to put them on still but I know the ones that are on there now are skinny as **** so I really don't know what to think..
http://www.trademotion.com/partlocat...05&catalogid=2
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM
bTanz
G35 Coupe V35 2003 - 07
16
10-15-2015 02:31 PM