Sway Bar End Links
Sway Bar End Links
I recently got the Hotchkis sways from Stillen.
Question: Do I need to upgrade my end links? I know the stiffer bars have a higher chance of wearing the end links out and busting them, but I wanted to know how often that actually happens or who has upgraded their end links.
I found an online retailer that had end links for sale but now I can't find it, even by searching google, etc. If anyone has a link to some G35 coupe sway bar end links it would be much appreciated.
Question: Do I need to upgrade my end links? I know the stiffer bars have a higher chance of wearing the end links out and busting them, but I wanted to know how often that actually happens or who has upgraded their end links.
I found an online retailer that had end links for sale but now I can't find it, even by searching google, etc. If anyone has a link to some G35 coupe sway bar end links it would be much appreciated.
Last edited by 425skyline; Mar 24, 2008 at 07:26 AM.
Originally Posted by 06PlatinumG
any "problems") and many are using the PowerGrids.
http://my350z.com/forum/showthread.php?t=316885
Originally Posted by pavelpg
awesome! thanks a ton... but damn the end links cost as much as the damn sways.. wtf
Here is a "comparison" of SPL Parts (L), Stock (M) and PowerGrids (R).
Happy Shopping...
Originally Posted by pavelpg
Yeah, I'm all for high quality. Just didn't expect to be paying 700+ for sways I suppose.
I'll prolly end up getting those powergrids soon.
I'll prolly end up getting those powergrids soon.
Trending Topics
You can save your money if your not lowered, you shouldn't need to replace the end links right away. If you are lowered you are preloading the sway and need the adjustable links.
hmm good point. I am getting that notorious squeaking noise right now and know I need to grease it up or something, but I got a little paranoid about not upgrading the end links either.
what kind of grease do you guys recommend? How do I grease the brackets? I didn't install my bars, but I think I'm going to go get a jack and some stands and grease them myself while I put those collars on. No reason to blow more money on labor.
what kind of grease do you guys recommend? How do I grease the brackets? I didn't install my bars, but I think I'm going to go get a jack and some stands and grease them myself while I put those collars on. No reason to blow more money on labor.
Last edited by 425skyline; Mar 24, 2008 at 07:26 AM.
Registered User
Joined: Aug 2004
Posts: 4,288
Likes: 3
i use white lithium grease. inside and outside surfaces of the
bushing. use a good amount. you might be able to find some
rings at your local hardware store and just tie it down with some
hose clamps.
since you have the old bar that moves around, you might be better
off with teflon tape so that you can cover a larger area. and then
just greaseup the outside of the bushings using lithium grease.
bushing. use a good amount. you might be able to find some
rings at your local hardware store and just tie it down with some
hose clamps.
since you have the old bar that moves around, you might be better
off with teflon tape so that you can cover a larger area. and then
just greaseup the outside of the bushings using lithium grease.
Originally Posted by kenchan
i use white lithium grease. inside and outside surfaces of the
bushing. use a good amount. you might be able to find some
rings at your local hardware store and just tie it down with some
hose clamps.
since you have the old bar that moves around, you might be better
off with teflon tape so that you can cover a larger area. and then
just greaseup the outside of the bushings using lithium grease.
bushing. use a good amount. you might be able to find some
rings at your local hardware store and just tie it down with some
hose clamps.
since you have the old bar that moves around, you might be better
off with teflon tape so that you can cover a larger area. and then
just greaseup the outside of the bushings using lithium grease.
It's normally recommended to use heavy duty silicone spray instead. I've used this before on my end links' bushings and it works for a while, until the driver side bushing just crapped out and squeaked to no end. I ended up buying the revised end links from Riverside Infiniti for like ~$15 and installing them myself. So far so good! The install of the endlinks are super simple too.
Originally Posted by bert039
I ended up buying the revised end links from Riverside Infiniti for like ~$15 and installing them myself. So far so good! The install of the endlinks are super simple too.
Let me try to dig up a picture for you.
When I compared the two, the newer endlink was "beefier" in the extent that the thickness of the shaft was thicker. The bushings, on the other hand, looked about the same.
In all honesty, I think that if I were to have bought a new "unrevised" endlink (which Infiniti doesn't sell) it would have been the same. I'm a little skeptical about the how the beefier endlink solved the squeaking. I think that just the fact that the bushing was new on new endlink solved the problem. But hey, $15 to fix the non stop squeaking was peanuts to me.
When I compared the two, the newer endlink was "beefier" in the extent that the thickness of the shaft was thicker. The bushings, on the other hand, looked about the same.
In all honesty, I think that if I were to have bought a new "unrevised" endlink (which Infiniti doesn't sell) it would have been the same. I'm a little skeptical about the how the beefier endlink solved the squeaking. I think that just the fact that the bushing was new on new endlink solved the problem. But hey, $15 to fix the non stop squeaking was peanuts to me.
Ok, I just cleaned and re-greased the crap out of my bushings on the swaybars several weeks ago. Today I was going over some speed bumps and I'm hearing squeaking again... WTF?! I used this stuff called "Super Lube" from a local industrial supply shop. It's synthetic silicone type grease; not lithium. Is it normal for grease to wear out this fast? It was fine for several weeks until I took the bottom plastic shield/cover off and didn't put it on while it rained for a few days. It's not like I was river-crossing the whole time though, plus this grease shouldn't just run off with water, right?
what exactly is "preload" anyway? sorry for my ignorance
what exactly is "preload" anyway? sorry for my ignorance
Last edited by 425skyline; Apr 11, 2008 at 03:21 AM.
