z springs front/ coupe springs rear--ID reference
Originally Posted by DangerMouse
Hi 68_GT,
I bet you have the same front springs as I do - revised (05+) G35 coupe sport springs with a spring rate of 314lbs-in. I do not have the non-sport springs to compare with, but believe they are the same length (and spring rate) as the regular coupe front springs.
Here's one reference post (OEM 19-inch wheels) -
https://g35driver.com/forums/brakes-suspension/98419-will-springs-really-ruin-your-ride.html
Dan
I bet you have the same front springs as I do - revised (05+) G35 coupe sport springs with a spring rate of 314lbs-in. I do not have the non-sport springs to compare with, but believe they are the same length (and spring rate) as the regular coupe front springs.
Here's one reference post (OEM 19-inch wheels) -
https://g35driver.com/forums/brakes-suspension/98419-will-springs-really-ruin-your-ride.html
Dan
damn it I got jacked ! that was a waste of money and a lot of work for nothing. Weird the front springs came with these rear springs which have 2 red dots on the rears
I've just bought a used set of 350z suspension from an 05 model (springs and struts) with only 10,000kms. My questions is..should I just fit the springs on my stock struts or should I replace the whole 350z setup in my sedan..seeing as my stock struts have done more than 30,000ks. Any pros and cons in doing so? Mine is an 05 sedan.
Originally Posted by n15m0
I've just bought a used set of 350z suspension from an 05 model (springs and struts) with only 10,000kms. My questions is..should I just fit the springs on my stock struts or should I replace the whole 350z setup in my sedan..seeing as my stock struts have done more than 30,000ks. Any pros and cons in doing so? Mine is an 05 sedan.
1. Your stock rear shocks will not hold up to the spring rates of the revised 350z springs.
2. No spring compressor needed to swap the stuff out making installation much easier.
3. It's a factory matched set. Not that it probably really matters...
I have an 05 sedan and I am about to do this also!
Thanks OP for this post...
You just saved me from making a bad buy & alot of time wasted for nothing..
And thanks to Redlude for not yelling at me and telling me to search ( which I was ) when I PM'd him asking about this very thing...( hadn't found this post yet red )..
You just saved me from making a bad buy & alot of time wasted for nothing..
And thanks to Redlude for not yelling at me and telling me to search ( which I was ) when I PM'd him asking about this very thing...( hadn't found this post yet red )..
Hope someone can help me out here:
2006 G35x on OEM suspension
Looking to drop around an inch around - what should I be using?
Can I use Z springs alone or do I need the struts/shocks with it?
Revised or Unrevised?
2006 G35x on OEM suspension
Looking to drop around an inch around - what should I be using?
Can I use Z springs alone or do I need the struts/shocks with it?
Revised or Unrevised?
HELP!! I just received my so called 350Z frt struts & springs for my G sedan but they look totally dif they are larger in diam & the mounting is dif are they really 350Z ?? The 350Z & G35 should look exactly alike correct??
https://g35driver.com/forums/2833639-post2.html




