i recently install Stance coilover, Eibach swaybar, SPC rear camber. Now, the passenger side (F,R) start to create a small rattle when drive over a small bump, uneven surface. Any ideas what cause this rattle?

 

is it a rattle or a clunk? If its a rattle, your coil overs might not have the locking rings tight (the rings that push the spring up to the perch), if its more of a clunk it could be your sway bar endlinks on their way out, OEM's suck, look into power grids

 

some time it sound like metal to metal and sometime it sound like rubber to metal (squeaking noise). i retight every suspension parts but the noise still there do you think because of a swaybar bracket that i over torgue. this audible noise is irritating my ears

 

sounds like your sway bar might just need some lubrication, either that or compression rods

 

lube the swaybar bushings and get new endlinks.

 

your endlinks are probably loose.

 

yeah check your end link...i lowered my car about 3 weeks ago, last week i got a rattle in the front pass. area on slow bumps. like coming off the driveway . took the wheels off on sunday to find that the end link was loose.

 

i think because of the swaybar. i dropped my car down to 0 gap between the fender and wheel.....so i will check the endlinks plus greases the bushing. i will keep you all updated. Thanks for all your inputs and have a good one everyone!

 

is it possible to tighten the endlink through the wheel well?

 

any update on this??