I need help- can't push down brake pedal

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Dec 8, 2008 | 12:00 PM

#16

ShanesG

Thread Starter

Former G35driver Vendor

iTrader: (84)

Joined: Sep 2007

Posts: 23,550

Likes: 335

From: Pasadena

ok here is what im talking about,,,would this affect it

Name: 000.jpg
Views: 1512
Size: 61.2 KB

When i took it off there was pressure inside the hose...

Dec 8, 2008 | 12:04 PM

#17

rookie

Former G35driver Vendor

iTrader: (19)

Joined: Mar 2006

Posts: 3,420

Likes: 5

From: OC

That's an evap line.

Dec 8, 2008 | 12:07 PM

#18

mIKE

Registered User

iTrader: (4)

Joined: Dec 2007

Posts: 6,408

Likes: 7

From: Orange County, CA

Master CylindeR?

Dec 8, 2008 | 12:10 PM

#19

ShanesG

Thread Starter

Former G35driver Vendor

iTrader: (84)

Joined: Sep 2007

Posts: 23,550

Likes: 335

From: Pasadena

Yeah, so it wouldn't be that, theres a valve right there under that green cap, it also says dont exceed 1psi....when i took it off pressure came out!

Dec 8, 2008 | 12:11 PM

#20

ShanesG

Thread Starter

Former G35driver Vendor

iTrader: (84)

Joined: Sep 2007

Posts: 23,550

Likes: 335

From: Pasadena

ok i Just went to start the car with my foot on the pedal...and nothing....still stuck...would the MC go out just like that???

Dec 8, 2008 | 12:12 PM

#21

rookie

Former G35driver Vendor

iTrader: (19)

Joined: Mar 2006

Posts: 3,420

Likes: 5

From: OC

It's for the emissions system. One end goes to the evap canister in the back, one end goes to a sensor bolted to the plenum.

Dec 8, 2008 | 12:15 PM

#22

ShanesG

Thread Starter

Former G35driver Vendor

iTrader: (84)

Joined: Sep 2007

Posts: 23,550

Likes: 335

From: Pasadena

Yeah...so it wouldn't be that correct...

Dec 8, 2008 | 12:19 PM

#23

rookie

Former G35driver Vendor

iTrader: (19)

Joined: Mar 2006

Posts: 3,420

Likes: 5

From: OC

Sensor is one way, you would get a check engine light if the vacuum side was disconnected. It shouldn't affect brake system, but I would put it back on if it's off.

Dec 8, 2008 | 12:26 PM

#24

ShanesG

Thread Starter

Former G35driver Vendor

iTrader: (84)

Joined: Sep 2007

Posts: 23,550

Likes: 335

From: Pasadena

No, everything is back on and reconnected. But that was the only thing i changed when i got home and then my brakes wouldn't depress when i went to leave!