Bushing stuck in rear spindle
#16
Join Date: Jun 2011
Location: Westchester, IL (near Chicago)
Posts: 46
Received 0 Likes
on
0 Posts
The first thing I did was ripped out the inner section of the lower bushing leaving a little rubber and the sleeve. A careful hacksaw will eventually cut a notch in the sleeve and then using a large socket that was the same size as the bushing I was able to easily hammer it out.
To install the new one I used a threaded rod along with a few sockets..
http://www.superstreetonline.com/how...d-replacement/
With the threaded rod with 2 bolts on one side and a socket on either side I was able to hit the thing with an air hammer until it pushed the bushing into the knuckle.
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM
TreeFiddy
G35 Coupe V35 2003 - 07
3
08-10-2015 06:50 PM
netcbc
Steering & Suspension CDN
0
07-24-2015 01:59 PM