okay.. i am having problems with my suspension.. this is what i had installed yesterday..

i had the HKS Hypermax III non-sport coilovers installed
SPL front camber arms
SPL rear camber arms
SPC toe bolts..


the car is pretty slammed.. i don't want to drive it until i get the car aligned. i have an appointment next Monday the 8th at West End in Gardena..

i drove it up the street to see if i rubbed and i rub a lil bit.. when i drive up the road only about a couple hundred feet, the "VDC OFF" and "SLIP" light both turn on .. when i press the "VDC OFF" button, it doesn't do anything.. it doesn't turn off or on.. pretty much at the same time the VDC engages, which kinda feels like ABS...

Does anyone know what might be causing this..?
Has anyone had this problem before..?

we were thinkin that it could be the alignment/toe/camber way out of adjustment, thus causing the car to go into VDC and SLIP or something.. i would imagine that after installing all of this equipment that it would be all off until alignment..

anybody..???

thankx..

Alf

 

Did you install the abs brackets included in the kit? You may need to remove or add hub shims...if they were installed. Look at #13 particularly in these directions:

http://www.spcalignment.com/PROD_DIR...txt&cmd2=72125

 

^^^^ I have the SP"L" front kit.. Those parts don't come with this kit..

 

check your fluid level....

 

alignment people....

 

Check your brake fluid!

 

it was the alignment...................

 

Good to know this. I am in the process of getting a new suspension set up.