camber degree help! do i need front cambers?
#1
camber degree help! do i need front cambers?
lowered on z s techs heres my camber adjustment sheet i got from this car place by my house there asking 800 for the spc front and rear kit installed
not sure if i really need front camber kits? i know i need the rear least ive been told hoping someone can tell me what i need?
http://i41.tinypic.com/10igc9z.jpg
not sure if i really need front camber kits? i know i need the rear least ive been told hoping someone can tell me what i need?
http://i41.tinypic.com/10igc9z.jpg
#2
Everyone is different concerning what is too much camber. And you should know that the sedan, coupe and Z all have different oem camber specs (sedan also has different rear toe specs).
Some will say your fine, just get your toe in settings to spec.
Other's will say to set front toe in correctly and get a rear camber arm and elongated toe cam bolt setup.
I wouldn't want that much camber on the street ( my tire pyrometer didn't how I needed them) So, I would get front and rear arms with elongated toe cam bolts and reset to,....
Front: -1.3 degree camber
1mm combined toe in
Rear -1 degree camber
1.6mm combined toe in
Some will say your fine, just get your toe in settings to spec.
Other's will say to set front toe in correctly and get a rear camber arm and elongated toe cam bolt setup.
I wouldn't want that much camber on the street ( my tire pyrometer didn't how I needed them) So, I would get front and rear arms with elongated toe cam bolts and reset to,....
Front: -1.3 degree camber
1mm combined toe in
Rear -1 degree camber
1.6mm combined toe in
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM
netcbc
Steering & Suspension CDN
0
07-24-2015 01:59 PM