anyone have a diy for SPC rear camber kit & toe?
#1
#2
There's this pretty cool website called Google... ![5091](https://g35driver.com/forums/images/smilies/action-smiley-029.gif)
http://blog.stillen.com/installation...-installation/
http://forums.nicoclub.com/spc-rear-...s-t387090.html
It's a pretty straight forward install. The hard part was shaving out the hole for the toe bolt. A dremel is a must. I had issues getting an angle. Might help to have the car jack-up (and secure) as high as possible. Of course, having the car on a lift would be ideal. Wear eye protection too, cuz those shavings get everywhere!
Good luck, have fun, be safe.
![5091](https://g35driver.com/forums/images/smilies/action-smiley-029.gif)
http://blog.stillen.com/installation...-installation/
http://forums.nicoclub.com/spc-rear-...s-t387090.html
It's a pretty straight forward install. The hard part was shaving out the hole for the toe bolt. A dremel is a must. I had issues getting an angle. Might help to have the car jack-up (and secure) as high as possible. Of course, having the car on a lift would be ideal. Wear eye protection too, cuz those shavings get everywhere!
Good luck, have fun, be safe.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
07-24-2015 01:59 PM