I am trying to compare my current brembos off my 03 6MT with others out there. I have the stage 2 stoptech slotted rotor kit (these size any different to stock?)

355mm 4 pot kit a friend is selling for $750 (this cheap for fronts?)
I cant find anywhere what the size of ours are...

Can anyone help?
I found a heap of info on BBK
http://www.350z-tech.com/wiki/index.php/Big_Brake_Kits

But no stock specs

Thanks for all your help

 

OEM Brembos are 332mm (13" rotors)

 

Dam, after 1 or more hours of searching u answer in 10 seconds!!!

Is that the same for front and rear?

355mm is that a BBK or standard?

Thanks

 

355mm is a 14" rotor. The Akebono (G37S) brakes are 14" rotors.

The rear on own Brembos is a little under 13"

 

So i cant use these 355mm on my stock rotors?

 

afaik 355mm refers to the rotors, not the calipers

 

I was also told we have 256mm size but above says 332mm..
That they are 13" which is 330mm (both front and rear??)

I have the stoptech slotted powerslot rotors with stock brembos
I would love to know the mm for front and rear as its not on their website


I would also like to know what spec the 4 pot front and 2 pot rear brembos are,
what size rotor they are compatible with and what size calipers we can fit on the stoptech rotors i have..

Its all very confusing and wish there was a nice post that had all the info.
Anyone know enough to help with the above?

 

There won't be any calipers you can use with your current rotors, nor would you want to since you already have 4 piston calipers. Moving up to a 6 piston caliper requires a 14" rotor in most if not all cases.