? for Tein CS users

Old Nov 11, 2005 | 02:33 PM
  #1  
Beta99's Avatar
Thread Starter
|
Registered User
iTrader: (6)
Joined: Apr 2005
Posts: 273
Likes: 0
? for Tein CS users

My current setup is the stock 05 6mt coupe sport suspension.
I want to lower the car (~1” front and ~.5" rear) with only a slight increase in stiffness...To those who have the Tein CS installed, what is your daily/spirited driving setup?
What about that rear noise, is everyone else having it too?
 

Last edited by Beta99; Nov 11, 2005 at 03:01 PM.
Reply
Old Nov 11, 2005 | 03:13 PM
  #2  
G35COUPEBC's Avatar
Registered User
Joined: Mar 2004
Posts: 57
Likes: 0
I've had the Tein CS installed on my 04 6MT w/stock 18's for about 7 weeks now. I'm quite happy with comfort and use for daily driving.

I pretty much had it set to the reference figures (F:1.1/R:0.75), I think the appearance looks great, especially with stock wheels for now. I have the rebound/dampening set approx. in the middle and the ride is only slightly stiffer than stock. If your looking to make it exactly like a stock ride, I think it's possible if you play with the settings even more.

After the alignment sources tell me I'm ok to without a camber kit etc, however I'll see how my tires do after more driving.

Now the only issue is the rear noise, it seems to make alot more noise compared to when I 1st had it installed. It use to only make a slight rattle noises, now I'm hearing squeeks in the rear too, however this maybe because the weather is colder now? Keep in mind this is only when driving over uneven surfaces or speed bumps. I've been told w/coilovers always expect to hear noises, it's part of the setbacks for this setup.

Hope this helps...
 
Reply
Old Nov 11, 2005 | 11:24 PM
  #3  
Cactus's Avatar
Registered User
Joined: May 2004
Posts: 1,106
Likes: 0
From: Mountville,PA USA
Sounds like your alignment sources might be wrong. I thought anything over .5 inches screwed the camber???
 
Reply
Old Nov 12, 2005 | 02:55 PM
  #4  
G35COUPEBC's Avatar
Registered User
Joined: Mar 2004
Posts: 57
Likes: 0
Alignment is not within factory specs, however within a reasonable variance to go without the kits/arms etc.
 
Reply
Old Nov 14, 2005 | 12:22 AM
  #5  
Beta99's Avatar
Thread Starter
|
Registered User
iTrader: (6)
Joined: Apr 2005
Posts: 273
Likes: 0
Thanks for ur input G35COUPEBC...anyone esle wanna chime in?
 
Reply
Old Nov 14, 2005 | 12:43 AM
  #6  
caelric's Avatar
Registered User
iTrader: (4)
Joined: Dec 2004
Posts: 1,229
Likes: 42
From: Omaha, NE
Between TEIN CS and TEIN Flex, which one is the one closer to stock? I thought the Flex was harder, and the CS closer to stock, but I can't remember correctly now...

Dave
 
Reply
Old Nov 14, 2005 | 12:56 AM
  #7  
Gsedan35's Avatar
Registered User
iTrader: (2)
Joined: Apr 2003
Posts: 3,288
Likes: 35
Originally Posted by caelric
Between TEIN CS and TEIN Flex, which one is the one closer to stock? I thought the Flex was harder, and the CS closer to stock, but I can't remember correctly now...

Dave
Most certainly the CS.
 
Reply
Old Nov 14, 2005 | 12:57 AM
  #8  
caelric's Avatar
Registered User
iTrader: (4)
Joined: Dec 2004
Posts: 1,229
Likes: 42
From: Omaha, NE
Ok, thanks

Dave
 
Reply
Old Nov 14, 2005 | 01:04 AM
  #9  
GEE PASTA's Avatar
Florida G35 Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,457
Likes: 0
From: So Calif / Utah
Here is a little info for you. You will need to apply some silicon spray or W-D40 to all the suspicion joints. I had problems with my sways making noise. IM real happy with the CS


http://my350z.com/forum/showthread.php?t=138167
 
Reply
Old Nov 14, 2005 | 10:07 AM
  #10  
Beta99's Avatar
Thread Starter
|
Registered User
iTrader: (6)
Joined: Apr 2005
Posts: 273
Likes: 0
Thanks GEE PASTA but was that a typo??
50/50 Frt. 25/75 back...
 
Reply
Old Nov 14, 2005 | 12:35 PM
  #11  
GEE PASTA's Avatar
Florida G35 Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,457
Likes: 0
From: So Calif / Utah
Originally Posted by Beta99
Thanks GEE PASTA but was that a typo??
Front setting on the coil overs were 8 clicks out from the softest setting, The backs were 4 clicks out from the softest setting.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
davizzle
Picture Share
23
Feb 4, 2018 12:41 PM
Blue Dream
The G-Spot
40
Dec 5, 2015 10:56 AM
w4kj4k
Wheels & Tires
4
Oct 2, 2015 07:57 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:39 AM.