teins? volk sf winnings?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 16, 2006 | 06:17 AM
  #1  
wan2hmp247's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jan 2005
Posts: 168
Likes: 0
From: california
teins? volk sf winnings?

if anyone has tein basics or
volk sf winning in diamond black that they want to sell
front:
19x9.5" w/ a +19 offset high disk
rear:
19x10.5" w/ a +17 offset low disk

pm me or email me at wan2hmp247@gmail.com

im looking to get both of these thank you
 
Reply
Old Jan 19, 2006 | 12:51 AM
  #2  
mrjonang's Avatar
Registered User
Joined: Apr 2005
Posts: 1,102
Likes: 1
From: Walnut, Ca
i just bought a set of sf-winnings with your exact specs. but there mercury silver . i got to say there effin HOT. good luck on your buy
 
Reply
Old Jan 19, 2006 | 01:30 AM
  #3  
Omeezy's Avatar
Registered User
iTrader: (3)
Joined: May 2005
Posts: 204
Likes: 0
From: Pasadena, CA/ Atlanta, GA
i have basically the exact setup you mentioned except my sf winnings are gunmetal. Let me know if you would like to see any pics.
 
Reply
Old Jan 19, 2006 | 01:44 AM
  #4  
jimmytango00's Avatar
Registered User
iTrader: (1)
Joined: Oct 2005
Posts: 1,332
Likes: 2
From: Los Angeles
can you post some on here.
 
Reply
Old Jan 19, 2006 | 03:46 PM
  #5  
Omeezy's Avatar
Registered User
iTrader: (3)
Joined: May 2005
Posts: 204
Likes: 0
From: Pasadena, CA/ Atlanta, GA
here ya go
https://g35driver.com/forums/picture-share/81874-few-pics-stable.html
 
Reply
Old Jan 19, 2006 | 11:14 PM
  #6  
wan2hmp247's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jan 2005
Posts: 168
Likes: 0
From: california
your wheels look real nice :] but i got my mind set on the diamond blacks in those config if you guys know anyone who wants to get rid of theirs please let me know :] well they have to be in good condition too no bent rims or mile long scratches thank you :]
 
Reply
Old Jan 20, 2006 | 10:11 AM
  #7  
jimmytango00's Avatar
Registered User
iTrader: (1)
Joined: Oct 2005
Posts: 1,332
Likes: 2
From: Los Angeles
that looks sweet...you had to roll your fenders right?
 
Reply
Old Jan 21, 2006 | 03:16 PM
  #8  
Omeezy's Avatar
Registered User
iTrader: (3)
Joined: May 2005
Posts: 204
Likes: 0
From: Pasadena, CA/ Atlanta, GA
nope i have not had to roll my fenders at all
 
Reply
Old Jan 22, 2006 | 11:47 PM
  #9  
allforthecash's Avatar
Registered User
iTrader: (3)
Joined: Nov 2004
Posts: 1,108
Likes: 0
Originally Posted by Omeezy
nope i have not had to roll my fenders at all
You have +17 in the rear and you didn't have to roll the fenders??????????????? what size tire do you have on it?

Jimmytango: +17 in the rear requires rolling the fenders with SF winnings....but it maybe dependent on tire size as well (not sure)......

I have 275 in the back ontop of a 10.5/+23....no fender rolling...you can also do 285 in the rear with no rolling
 
Reply
Old Jan 23, 2006 | 12:40 AM
  #10  
Omeezy's Avatar
Registered User
iTrader: (3)
Joined: May 2005
Posts: 204
Likes: 0
From: Pasadena, CA/ Atlanta, GA
Thats not my offset, I have 285s in the rear but my offset is more than +17 thus I did not have to roll my fenders and have not experienced any rubbing during HARD corning. I have Toyo T1R tires.
As far as of set goes, im not positive what exactly i went with at this point but i want to say its +19 in the front and maybe 22/23 in the back. I'll have to check my papers when my car gets delivered to me here in Atlanta.
 

Last edited by Omeezy; Jan 23, 2006 at 12:43 AM.
Reply
Old Jan 23, 2006 | 12:33 PM
  #11  
jimmytango00's Avatar
Registered User
iTrader: (1)
Joined: Oct 2005
Posts: 1,332
Likes: 2
From: Los Angeles
Originally Posted by Omeezy
Thats not my offset, I have 285s in the rear but my offset is more than +17 thus I did not have to roll my fenders and have not experienced any rubbing during HARD corning. I have Toyo T1R tires.
As far as of set goes, im not positive what exactly i went with at this point but i want to say its +19 in the front and maybe 22/23 in the back. I'll have to check my papers when my car gets delivered to me here in Atlanta.

i really doubt your +17 cause im pretty sure that requires you to roll your fenders just like allforthecash said. Those are pretty agressive offsets... i'll probly go with those later if they offer that on the work vs-xx
 

Last edited by jimmytango00; Jan 23, 2006 at 12:36 PM.
Reply
Old Jan 23, 2006 | 07:38 PM
  #12  
richboy's Avatar
MORE POWER PLZ!!!
iTrader: (5)
Joined: May 2005
Posts: 718
Likes: 0
From: So Cal
Hey i really like your Rims im in the process of ordering my rims and i would like to know that wheel size and offsets for ur rims? Is your ride droped? Well this was what i was going to get 19x9.5 +19 or +21 (fronts) and 19x10.5 +23 (rears) Im for sure that the +23 will match the fender perfectly.
 
Reply
Old Jan 23, 2006 | 11:09 PM
  #13  
jimmytango00's Avatar
Registered User
iTrader: (1)
Joined: Oct 2005
Posts: 1,332
Likes: 2
From: Los Angeles
+23 should be close to matching your fenders...unless your on a drop with no camber arms then it might not seem like it... you have a little bit of tuck up top cause of the camber. +22 is what i have on my rears and its pretty cool but i still want them out more so i'll probably get +17 rears next
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KruZZe
New Members Check In
14
Feb 27, 2023 05:04 PM
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
Diode Dynamics
Accessories-Vendor
39
Nov 30, 2021 02:28 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 07:30 AM.