"Z" Htechs?
"Z" Htechs?
Ok I am confused now, I have an 05 6mt and I want to drop the carabout an inch. I was going to buy the Htechs until a friend of mine told me the springs rates are softer then stock. I want to go lower, but I don't want a softer ride.
Is there any truth to this, and if so what to get short of coilovers?
Thanks for any help.
Is there any truth to this, and if so what to get short of coilovers?
Thanks for any help.
Registered User
Joined: Jul 2004
Posts: 498
Likes: 0
Check the sticky at the top of this forum section:
Looks like the Z H-Techs are the way to go.
Tein H-tech 350z linear springs .3”/.2” drop on 350Z G35 drop will be higher
Spring rates in LBS 358/375
Stiffer then oem springs by F+14% R+11% (see note at very top)
Transfers +3% roll stiffness to front
Tein H-tech G35 coupe & sedan(fronts are progressive, rears are linear)
Spring rates in lbs 324/260 (final rates only, softer intial front progressive rate unknown)
Stiffer or softer then oem springs by F+ 5% R-22% (see note at very top)
Transfers +27% roll stiffness to front
Spring rates in LBS 358/375
Stiffer then oem springs by F+14% R+11% (see note at very top)
Transfers +3% roll stiffness to front
Tein H-tech G35 coupe & sedan(fronts are progressive, rears are linear)
Spring rates in lbs 324/260 (final rates only, softer intial front progressive rate unknown)
Stiffer or softer then oem springs by F+ 5% R-22% (see note at very top)
Transfers +27% roll stiffness to front
Thread
Thread Starter
Forum
Replies
Last Post
xjohnnyleex
Brakes & Suspension
19
Aug 15, 2007 01:08 AM
