OBD II Scanner (K/W)
#16
Registered User
iTrader: (13)
It's pretty easy, the manual shows you how to do most of it.
From what I know:
1. Have the car on and plug it in
2. turn the car off and turn the key to the on position but not started
3. turn the unit on and let it fully load up (I think this one turns on when it's plugged in)
4. Just go through the menus and find read codes and it will tell you the code error.
I think you just need to do that the first time you use it though. So any other time just plug it in and read codes. Mines not here right now it's in my brothers car so I can't verify what each button says.
I can meet up with you if you're having trouble though.
From what I know:
1. Have the car on and plug it in
2. turn the car off and turn the key to the on position but not started
3. turn the unit on and let it fully load up (I think this one turns on when it's plugged in)
4. Just go through the menus and find read codes and it will tell you the code error.
I think you just need to do that the first time you use it though. So any other time just plug it in and read codes. Mines not here right now it's in my brothers car so I can't verify what each button says.
I can meet up with you if you're having trouble though.
#17
I don't mean to threadjack, but I have the Elmscan 5 in my TL and works great!! you can write custom software (if you have the sdk kit for it.. ) or download/buy software that can pretty much get you any type of information from your car via LAPTOP.
http://store.mp3car.com/OBDPro_USB_O..._p/com-091.htm - 85USD
http://store.mp3car.com/ElmScan_5_US..._p/com-039.htm - 130USD
I would prefer these, since many of you probably own a laptop and can easily keep track of everything. You can erase codes as well, pretty much keep a LOG of your daily engine activity. Fuel consumption, etc.
Anyone who might be interested in this, I can show you a demo
The OP's model does a great job as well, but limited information.. and its an insanely low price compared to other models so thanks 4 letting us know
http://store.mp3car.com/OBDPro_USB_O..._p/com-091.htm - 85USD
http://store.mp3car.com/ElmScan_5_US..._p/com-039.htm - 130USD
I would prefer these, since many of you probably own a laptop and can easily keep track of everything. You can erase codes as well, pretty much keep a LOG of your daily engine activity. Fuel consumption, etc.
Anyone who might be interested in this, I can show you a demo
The OP's model does a great job as well, but limited information.. and its an insanely low price compared to other models so thanks 4 letting us know
#19
and for those of you, who have FI and are interested in digital gauges, check out:
http://store.mp3car.com/PhotoGallery...Code=SOF%2DDCL
there are other products out there, but the best part about this is, you can customize it and if your into programming/graphics editing... you can make one of the sickest gauges using FLASH ... contact me, if your interested.
http://store.mp3car.com/PhotoGallery...Code=SOF%2DDCL
there are other products out there, but the best part about this is, you can customize it and if your into programming/graphics editing... you can make one of the sickest gauges using FLASH ... contact me, if your interested.
#20
Registered User
iTrader: (13)
Ok, so I read the manual, way too much info for this OF. I believe I located the port. Just couldn't bring myself to plug it in. Worried I'll press the wrong button and FU the G. It's not like taking apart pieces that I can see and replace if I FU. I don't do plumbing either.
Willin to drive and buy beverages.
Willin to drive and buy beverages.
#23
#24
Registered User
iTrader: (13)
So I did it. Code PO442
$10
Evap. Emissions system leak detected small leak
When I started the G I heard a new sound, a little rattle and not the regular rumble at first, then it sounded normal. Guess I need to check the exhaust system, sounds loose.
Could it be an exhaust leak that caused the code?
When I was done, I shut off the engine and pulled the reader out. Should I have tried to erase the code?
A code P0442 most likely means one or more of the following has happened:
A loose or improperly affixed gas cap Since I smelled a little gas, this seems unlikely, no?
A non-conforming gas cap (i.e. not factory/original brand)
A small leak/hole in a fuel vapor hose/tube
Other small leak in EVAP system
Faulty vent o-ring seal
Guess it's off the the mechanic.
$10
Evap. Emissions system leak detected small leak
When I started the G I heard a new sound, a little rattle and not the regular rumble at first, then it sounded normal. Guess I need to check the exhaust system, sounds loose.
Could it be an exhaust leak that caused the code?
When I was done, I shut off the engine and pulled the reader out. Should I have tried to erase the code?
A code P0442 most likely means one or more of the following has happened:
A loose or improperly affixed gas cap Since I smelled a little gas, this seems unlikely, no?
A non-conforming gas cap (i.e. not factory/original brand)
A small leak/hole in a fuel vapor hose/tube
Other small leak in EVAP system
Faulty vent o-ring seal
Guess it's off the the mechanic.
Last edited by whatacar; 06-18-2009 at 09:07 PM.
#26
Registered User
iTrader: (13)
So I did it. Code PO442
$10
Evap. Emissions system leak detected small leak
A code P0442 most likely means one or more of the following has happened:
A loose or improperly affixed gas cap Since I smelled a little gas, this seems unlikely, no?
A non-conforming gas cap (i.e. not factory/original brand)
A small leak/hole in a fuel vapor hose/tube
Other small leak in EVAP system
Faulty vent o-ring seal
Guess it's off the the mechanic.
$10
Evap. Emissions system leak detected small leak
A code P0442 most likely means one or more of the following has happened:
A loose or improperly affixed gas cap Since I smelled a little gas, this seems unlikely, no?
A non-conforming gas cap (i.e. not factory/original brand)
A small leak/hole in a fuel vapor hose/tube
Other small leak in EVAP system
Faulty vent o-ring seal
Guess it's off the the mechanic.
#28
Registered User
iTrader: (13)
Yes, a couple of years ago. As it turns out, when I started the car to head out to the mechanic ....... the middle part of the display stayed black. I hit the fan button and everything came back and then I looked at the main display and NO CHECK ENGINE SOON light anymore. Cancelled the appointment. Must have been the gas cap improperly tightened. Maybe I'll spring for a new one and clean the neck.
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
09-06-2023 10:07 AM
Cbohannan101
G35 Sedan V36 2007- 08
1
09-12-2015 10:32 PM