How to Apply Megs PlastX
#1
#3
xpel sells headlight protectors. might want to check here:
www.autopaintguard.com
i would use soft foam pads (in my case Griot's orange pad) and use a
slower speed 4.5 or so on the RO.
www.autopaintguard.com
i would use soft foam pads (in my case Griot's orange pad) and use a
slower speed 4.5 or so on the RO.
#4
#6
I've usually hit mine with a terry cloth applicator pad, rubbing in small circles for about 5 minutes on each light, then removing with MF towel.
This past weekend I used a PC with a white pad, working up to 4.5-5 speed and it seems to have worked pretty well too. I was able to get a fairly significant scratch out of my tail light after a few passes.
This past weekend I used a PC with a white pad, working up to 4.5-5 speed and it seems to have worked pretty well too. I was able to get a fairly significant scratch out of my tail light after a few passes.
Thread
Thread Starter
Forum
Replies
Last Post
yosip1115
Engine, Drivetrain & Forced-Induction
4
08-26-2015 10:46 AM