Testing the waters: Interest in full Part out?
#61
JWT Twin Turbo, twin-intercooler kit: Sold
Power Enterprise 380cc injectors: Sold
JWT engine management box (split second box): $250
This has tons of hours of tuning time and $$$ put into it, and additionally has been programmed to control fuel in addition to ignition timing. The stock kit comes with the engine management just pulling back timing. I found that it ran a bit lean up top. So I got bigger injectors and had Tony Palo from T1 motorsports wire up the fuel control as well and tune. After some air flow mods (iso spacer and test pipes) I had Chris Macellaro do a re-tune as well as making things more conservative so I could hit the track worry free.
Note: I advise any potential buyer to still do a fine tuning session after their install. This will likely be just 1 hour on the dyno to account for any small differences between my setup and yours. The bulk of the long hours of tuning has already been done and paid for.
1 step colder NGK spark plugs: Sold
Megan boost gauge: Sold
AEM air/fuel gauge + sensor: Sold
Motordyne XYZ pipe: Sold
Resonated test pipes with additional O2 bungs welded in + O2 sensor extensions: $100 -> soon to be Sold
Stoptech slotted rotors: $100 for all 4 plus your stock Brembo kit rotors
Bilstien PSS9 height and rebound adjustable coilover: $1000.
Get some real quality coilovers for a great price. These have been dialed in. Previously, the ride was very bouncy, it is now perfect.
Hotchkis 2nd Gen adjustable sway bars: Sold
Powergrid adjustable endlinks (front): soon to be Sold
TopSpeed mid chassis brace: $40. I did have this scrape against something, so it's not in perfect condition. I will take pictures for anyone interested. Pending Sale
mint Enkei RPF1 18x9.5” (f) 18x10.5” (r) with Toyo T1R's: $850 + your 2 stock coupe 18" front wheels. Pending Sale
Motordyne iso thermal spacer: $100
This weekend I will be posting the remaining items in the classifieds section, I had received notice of interest on some, but no commitment once I started the part out, so if you still want the gear, hit me up!
Power Enterprise 380cc injectors: Sold
JWT engine management box (split second box): $250
This has tons of hours of tuning time and $$$ put into it, and additionally has been programmed to control fuel in addition to ignition timing. The stock kit comes with the engine management just pulling back timing. I found that it ran a bit lean up top. So I got bigger injectors and had Tony Palo from T1 motorsports wire up the fuel control as well and tune. After some air flow mods (iso spacer and test pipes) I had Chris Macellaro do a re-tune as well as making things more conservative so I could hit the track worry free.
Note: I advise any potential buyer to still do a fine tuning session after their install. This will likely be just 1 hour on the dyno to account for any small differences between my setup and yours. The bulk of the long hours of tuning has already been done and paid for.
1 step colder NGK spark plugs: Sold
Megan boost gauge: Sold
AEM air/fuel gauge + sensor: Sold
Motordyne XYZ pipe: Sold
Resonated test pipes with additional O2 bungs welded in + O2 sensor extensions: $100 -> soon to be Sold
Stoptech slotted rotors: $100 for all 4 plus your stock Brembo kit rotors
Bilstien PSS9 height and rebound adjustable coilover: $1000.
Get some real quality coilovers for a great price. These have been dialed in. Previously, the ride was very bouncy, it is now perfect.
Hotchkis 2nd Gen adjustable sway bars: Sold
Powergrid adjustable endlinks (front): soon to be Sold
TopSpeed mid chassis brace: $40. I did have this scrape against something, so it's not in perfect condition. I will take pictures for anyone interested. Pending Sale
mint Enkei RPF1 18x9.5” (f) 18x10.5” (r) with Toyo T1R's: $850 + your 2 stock coupe 18" front wheels. Pending Sale
Motordyne iso thermal spacer: $100
This weekend I will be posting the remaining items in the classifieds section, I had received notice of interest on some, but no commitment once I started the part out, so if you still want the gear, hit me up!
Last edited by Mad A; 09-17-2011 at 01:32 PM. Reason: sold item
#64
Cool, I've updated the list above. i'll see you this afternoon!
Thanks for letting my know Chris, congrats on the new Enkeis! One of these days I will meet up with you and pick up my shirt, lol.
Thanks for letting my know Chris, congrats on the new Enkeis! One of these days I will meet up with you and pick up my shirt, lol.
#68
Jake, just hit me up on my cell when you want to drop by and pick them up!
Anyone heading to Stephen's shop in the near future please do me a favor and let me know, I'd like to come meet you at the place of your choice and ask you to take a pair of struts and the top speed brace with you to Stephen.
Anyone heading to Stephen's shop in the near future please do me a favor and let me know, I'd like to come meet you at the place of your choice and ask you to take a pair of struts and the top speed brace with you to Stephen.
#69
Thread
Thread Starter
Forum
Replies
Last Post
joedaddy1
Engine, Drivetrain & Forced-Induction
0
07-28-2015 02:58 PM