Is anyone using the utec and what are you using to monitor the a/f ?? i dont like the turboxs a/f tuner , it is too large.. also how user friendly is it to tune ??? My next mod needs to be some kind of ecu reflash or piggy

 

I'm using the AEM wideband. For logging I'm running the wideband to my laptop via 9 pin serial port and I'm logging the UTEC with USB. I'm using the MPS UTEC logging software to log both values simutaniously.

Hopefully, in the near future, I'll have a better option, but this works for now.

 

Thanx for ur help. does the software allow you to log the a/f values on the same screen as the utec? and is it the aem uego??

 

Yes, it does. I actually have mine set up to display on my Navi screen.

The only drawback is that it requires a computer for processing.

 

Ok huh??.....

The Utec does not allow you to datalog AF ratios???? What does it datalog then? AF is like the most important thing to datalog IMO.....

 

The UTEC doesn't have any user inputs on it. You can log TurboXS widebands, but there are a lot of people who had A/F guages before UTECs. Had I bought my UTEC first I might have just went with the TurboXS wideband, but since I already had the AEM installed I'm going to use it.

 

exactly, the utec will datalog your AF ratio perfectly if you buy turboxs wideband. kevin has figured out a way of datalogging the AF ratio using any wideband onto the same screen...


if you dont have a wideband already, i would get the turboxs one, they all are going to cost you 300-400 for a really good one, so why not just skip out having to cut up and make your own serial cable etc...

i understand if you already have a wideband and dont want to purchase another one

 

I have the Zeitronix which has wideband... If I get the UTEC is there anyway to innerface the two? I got some research to do.