afe intake for the G. Does anyone have this?
#1
afe intake for the G. Does anyone have this?
The are claiming the Power Increase: 13.50 Horsepower, 15.25 lbs. x ft. of Torque. Does anyone have this installed? What do you guys think I searched and couldn't find anything? Is it possible.
Here is the link:
http://www.afefilters.com/productreviews/54-11092-'03.5-'06InfinitiG35/54-11092pr.htm
Here is the link:
http://www.afefilters.com/productreviews/54-11092-'03.5-'06InfinitiG35/54-11092pr.htm
#6
Originally Posted by M.I.A. BlazinVQ
I HIGHLY doubt it'll give you those numbers. Just an FYI, intakes don't do **** on our cars. (unless paired with other breathing mods, namely, FI).
#7
Originally Posted by neo_rambo
The are claiming the Power Increase: 13.50 Horsepower, 15.25 lbs. x ft. of Torque. Does anyone have this installed? What do you guys think I searched and couldn't find anything? Is it possible.
Here is the link:
http://www.afefilters.com/productreviews/54-11092-'03.5-'06InfinitiG35/54-11092pr.htm
Here is the link:
http://www.afefilters.com/productreviews/54-11092-'03.5-'06InfinitiG35/54-11092pr.htm
Trending Topics
#9
Registered User
iTrader: (44)
Joined: Apr 2006
Posts: 3,038
Likes: 14
From: Chesapeake, VA/The Bronx, NY
Originally Posted by neo_rambo
the advantage I think to this is that its just a straight pipe with no cuts/connections (ie maf, z pipe, fittings)
Correct me if I'm wrong, but I think the MAF connect to the tube where I circle it in red.
Also, how good would the G run without the MAF?
(And those gains look real close the MotorDyne 3/8" spacer and MREV2 combo, very unlikely gains just from a intake)
#10
Originally Posted by citymunky
Correct me if I'm wrong, but I think the MAF connect to the tube where I circle it in red.
Also, how good would the G run without the MAF?
(And those gains look real close the MotorDyne 3/8" spacer and MREV2 combo, very unlikely gains just from a intake)
Also, how good would the G run without the MAF?
(And those gains look real close the MotorDyne 3/8" spacer and MREV2 combo, very unlikely gains just from a intake)
#12
Originally Posted by neo_rambo
I think you unscrew the maf sensor and slide it in the slot
the advertised. then you report your experiences with it. I'll be waiting for the thread "my car is slower than evarrrrrr!"
#14
#15
Originally Posted by neo_rambo
please explain whats wrong with the dyno
here's a stock VQ dyno...pretty easy to tell the difference
https://g35driver.com/forums/attachm...4&d=1181272719
even though the incraments are different, their dyno still drops like crazy and it's really low (but that can depend on type of dyno as well)
Last edited by 617G; 12-20-2007 at 12:00 PM.