I have a 6MT coupe and im looking at getting a motordyne spacer. Im confused though which one should I get. There is like a basic, iso, and another

 

you should really do a search...theres plenty of info on here bout that...but to answer your Q if you live where it snows you should get a copper iso spacers but if not you can get the basic...dont quote me on it tho

 

haha search=what the....too many posts at this point

 

well i was just saving you from gettin flamed hahaha...but 5/16 is the prefered size that alot of ppl use

 

haha i know man thanks

 

Hey Hendrix, 23 posts you're still a new guy....so Welcome to Driver. Since you have an '06 what you really need for the best performance is MotorDynes MREV2 & 5/16" spacer. That's worth no less than 20 HP and 30 lb-ft torque, that kind of increase you'll not only feel it in your seat but by the wear on your rear tires too.... If you feel the need to have a conversation with Tony here's his number 661-993-5111. This is the best value/bang for you $....nothing else comes close!
Gary

 

eh i dont have an 06 but an 04

 

if you have an 04, then just get the 5/16 spacers. and as staded abovem get the copper if you live in an are where the weather gets cold