I just installed my injen and it's resting on some black metal bar and it's rattling like crazy. Anyone had this problem or know how to fix it?
Thanks

P.S. I did it without the installation sheet because I don't have one

What are fast car made for? To go fast...SO RACE THE HELL OUT OF IT!

 

Hmm I just installed one last week. I didnt read the instructions but I have no rattle. I would say loosen everything up adjust it and tighten it back up.

 

Same thing happend to me. You need to have them ajust the
pipes a little higher, so that they are not so close to that braket. Easy fix.

 

get the car on a lift and loosen everything up and re-tighten in the right positions to where its not resting on that black bar piece. You should be ok.
I called my buddy at INjen and he hasnt gotten back to me yet about the instuctions yet.
Maybe someone has the instruction book that they can fax you from their recent installation ??? Anyone???


Stillen Stage 2 Supercharger, Stillen Front Bumper, Stillen Carbon Fiber Hood, Injen SES Cat-back Exhaust, Injen Cold Air Intake, 19" Axis Hiro Anthracite, Clear Corners

 

I think the problem is that the guy at the exhaust shop didn't install the small gold matal plate things that are suppose to be clamps. I'm not sure if those plates are suppose to be between the pipes or connect the left side pipe to the right side pipe. Anyone know? or has an idea? instructions?
thanks a bunch

What are fast car made for? To go fast...SO RACE THE HELL OUT OF IT!

 

same thing happened to me and I had a muffler shop weld a hanger in the middle and it lifted the resonators off of that cross member...

2 G or NOT 2 G, there is no question!

Injen SES, Kinetix cats, K&N Typhoon, 19" PIAA Super Rozza's (19x9 & 19x10)

 

I had the same problem, i also had to weld in another hanger.

 

I brought my car to my friend's shop and had him flipped the hanger and IT WORKED!! No more rattling...finally. Thank you all that submitted a solution.




What are fast car made for? To go fast...SO RACE THE HELL OUT OF IT!

 

glad it worked bro. thanks for buying from me =)
im selling my Stillen S/C if your interested now too

Stillen Stage 2 Supercharger, Stillen Front Bumper, Stillen Carbon Fiber Hood, Injen SES Cat-back Exhaust, Injen Cold Air Intake, 19" Axis Hiro Anthracite, Clear Corners

 

Same rubbing/raddle with the cross member. I'll be visiting Signal Automotove hopefully Wednesday.

04' G coupe/TB/Prem/Sport/Nav/35% Tint/Injen CAI/Injen Exhaust/Clear corners/V5 Plenum/GroundingGear/Nismo caps/Custom TS ECU/Hotchkis Sways
Plates: 1REVER1

 

I recently got the injen exhaust and i love it but there is a huge rattle when i downshift into high rpm's and also a little rattle that sounds like something is sparking when i put it into gear, my question is on all of yours when did the exhaust rattle on acceleration or deceleration and if you know how i might be able to fix mine, thanx in advance

 

Sounds like you have the same problem as the others. I would loosen everthing up and adjust it and tighten it back up.