Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

VQ35DE Rev-Up Cams

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #16  
Old 07-29-2011 | 10:16 AM
R6n350GT's Avatar
Registered User
iTrader: (4)
Joined: Sep 2010
Posts: 359
Likes: 19
Originally Posted by gorillanismosti
Cams sacrifice a little low to increase mid-range & high-end power, in drag applications you want this, and with a good turbine combo is amazing the power that you reach...
Thanks for that!
Is it a good idea to then get solid motor mounts for the extra torque? i got some stainless steel ones off ebay for $50.. dam impulse buy!
 
  #17  
Old 07-30-2011 | 12:27 PM
gorillanismosti's Avatar
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 14
Likes: 0
From: PR
Originally Posted by R6n350GT
Thanks for that!
Is it a good idea to then get solid motor mounts for the extra torque? i got some stainless steel ones off ebay for $50.. dam impulse buy!
That is a good mod for people with serious intentions, the only problem with that is you will feel everything under the hood in your dash and hands. That isn't too good for street driving experience isn't very comfortable but if your #1 priority is racing that is the way to go...
 
  #18  
Old 07-30-2011 | 06:35 PM
R6n350GT's Avatar
Registered User
iTrader: (4)
Joined: Sep 2010
Posts: 359
Likes: 19
Originally Posted by gorillanismosti
That is a good mod for people with serious intentions, the only problem with that is you will feel everything under the hood in your dash and hands. That isn't too good for street driving experience isn't very comfortable but if your #1 priority is racing that is the way to go...
Hm ok, i was reading its not as bad as some cars and that its only really a bit of extra noise . Is there some sort of poly rubber you can put on the end so its a semi solid mount? stiffer than stock but not 100% solid?
 
  #19  
Old 07-31-2011 | 06:51 PM
Sylvan lake V35's Avatar
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 311
From: Alberta
Most companies make specific cams for the rev-up motors.

here is JWT list they say specifically which motor they are for.

http://www.jimwolftechnology.com/customer_results.asp
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 06:43 PM
andrewvk
Engine - Complete Motors
32
04-07-2016 02:39 PM
Tmatheso
Media Share G35 Coupe V35
10
12-13-2015 04:24 PM
mbe32
G35 Coupe V35 2003 - 07
10
11-14-2015 12:09 AM
UT G35
General Tech Questions
6
09-03-2015 04:58 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: VQ35DE Rev-Up Cams



All times are GMT -4. The time now is 10:35 AM.